owners manual Ford Mustang

all ratings: 0 average rating: 5

Stability Control Some models may also come equipped Initiating Line Lock with a sport mode which allows the driver The initiation stage verifies that the vehicle to reduce normal AdvanceTrac system is ready for Line Lock function, and intervention and provide a more spirited confirms driver intent. Follow the prompts driving experience. To enter sport mode, in the information display in to initiate Line toggle the stability control button twice Lock. rapidly. The message appears in the information display that the system is now The following conditions must be met to in sport mode. initialize Line Lock: For vehicles equipped with the selectable • The vehicle is on a level surface. drive mode feature, AdvanceTrac sport • The engine is running. mode is not available. You can utilize the • The vehicle is traveling less than 25 performance oriented AdvanceTrac mode mph (40 km/h). by selecting track drive mode. In this mode, • Selectable Drive Mode is not in wet AdvanceTrac intervention is reduced and mode (if equipped). tuned specifically for track use only and is not for use on public roads. In all of the • There are no AdvanceTrac faults. selectable drive modes, you can disable If you want to cancel Line Lock once it is traction control and AdvanceTrac with the initialized, press the left information AdvanceTrac switch. display control. Once initiated, Line Lock Line Lock is prepared for activation and will remain (If Equipped) initiated up to 25 mph (40 km/h). If vehicle Line Lock is a feature intended for use at speed exceeds 25 mph (40 km/h), Line tracks only and should not be used on Lock will be automatically canceled. public roadways. Use of this feature will Engaging Line Lock result in significantly increased rear tire wear. It is intended to condition the rear Follow the prompts in the information tires to maximum traction prior to track display to engage Line Lock after it is use. Line Lock maintains brake force at the initialized. To engage, firmly apply the front wheels, allowing the rear wheels to brakes. Then press the OK button. Once spin with minimal vehicle movement. engaged, release the brake pedal. The This feature is located in the Track Apps front brakes will remain applied and the menu. Make selections through the 5-way rear brakes will release. At this point, the information display control and OK button engagement timer is initiated and shown located on the steering wheel. on the driver information display. Using Line Lock The following conditions must be met to There are three Line Lock stages: engage Line Lock: • The vehicle is on a level surface. • Initiated. • The engine is running. • Engaged. • The vehicle is stopped. • Off. • The parking brake is not applied. • The driver door is closed. • The transmission is in a forward gear. 145 Mustang (), enUSA, First Printing

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders