owners manual Seat Mii

all ratings: 0 average rating: 5

Advice leased from the lock carrier by a spring mech- must be flush with the surrounding body pan- anism ››› . els. ●Lift the bonnet up slightly while pressing ● While driving, if you notice that the bonnet the release lever 2 B in the direction of theis not correctly closed then stop immediately arrow to completely open the bonnet.and close it correctly. ● ● Only open and close the bonnet when there Take out the bonnet support rod from its is nobody within its range. clip in the direction of the arrow 3 C and place it in the corresponding open position 4 D (arrow). CAUTION ● To avoid damage to the bonnet and to the Closing the bonnet windscreen wiper arms, only open it when ●Slightly lift the bonnet ››› . the windscreen wipers are in place against the windscreen. ●Take out the bonnet support rod from the ● Before driving, always lower the wiper opening catch 4 D and insert it into its clip arms. 3 C in the opening catch. ●Let the bonnet fall from a height of 30 cm into its clip; Do not apply pressure! Engine oil If the bonnet is not correctly closed, open it once again and close it correctly. Introduction The bonnet is correctly closed when it is flush with the corresponding parts on the body- WARNING work. Fig. 106 C: Bonnet securing rod in the bon- Incorrectly handling engine oil can cause in- net. D: Bonnet supported by the bonnet se- jury and serious burns. curing rod WARNING ● Always protect your eyes when handling If the bonnet is not correctly closed, it could Opening the bonnet engine oil. suddenly open while driving leaving the driv- ● Oil is toxic and must be kept out of the ●Before opening the bonnet, make sure thater without visibility. This could result in a se- rious accident. reach of children. the windscreen wiper arms are in place against the windscreen ››› . ● ● Engine oil should only be kept in its origi- After closing the bonnet, always check that it is properly secured by the locking mecha-nal packaging; the same goes for used oil un- ●Pull the release lever 1 in the direction of nism in the lock carrier piece. The bonnettil it is disposed of. the arrow ››› Fig. 105 A. The bonnet is re- 146

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders