BMW i8 owners manual page 147

text version of content this owner's manual page from owners manual to the vehicle BMW i8, year of production 2014:

Seite 131 Interior equipment Controls 4. Likewise, press and hold the button of theproximately 20 seconds until the LED flashes desired function on the hand-held trans‐rapidly. All stored functions are deleted. The mitter. functions cannot be deleted individually. 5. Release both buttons as soon as the inte‐ rior rearview mirror LED flashes more rap‐ Sun visor idly. The LED flashing faster indicates that the button on the interior rearview mirror has been programmed. The system can Glare shield then be controlled by the button on the in‐ Fold the sun visor down or up. terior rearview mirror. If the LED does not flash faster after atVanity mirror least 60 seconds, change the distance and A vanity mirror is located in the sun visor be‐ repeat the step. Several more attempts at hind a cover. When the cover is opened, the different distances may be necessary. Wait mirror lighting switches on. at least 15 seconds between attempts. Canada: if programming with the hand- held transmitter was interrupted, hold Connecting electrical down the interior rearview mirror button devices and repeatedly press and release the hand-held transmitter button for 2 sec‐ Hints onds. Do not connect charging devices to the 12 volt socket in the vehicle Controls Do not connect battery chargers to the fac‐ Before operation tory-installed 12 volt sockets in the vehicle as Before operating a system using the uni‐ this may damage the vehicle battery due to an versal garage door opener, ensure that there increased power consumption.◀ are no people, animals, or objects within the range of movement of the remote-controlled Replace the cover after use system; otherwise, there is a risk of injury or Reinsert the lighter or socket cover after damage. use, otherwise objects may get into the lighter Also follow the safety instructions of the hand-socket or fixture and cause a short circuit.◀ held transmitter.◀ Sockets The system, such as the garage door, can be operated using the button on the interior rear‐ General information view mirror while the engine is running or when the ignition is started. To do this, hold downThe lighter socket can be used as a socket for the button within receiving range of the systemelectrical equipment while the engine is run‐ until the function is activated. The interior rear‐ning or when the ignition is switched on. view mirror LED stays lit while the wireless sig‐ nal is being transmitted. Note The total load of all sockets must not exceed Deleting stored functions 140 watts at 12 volts. Press and hold the left and right button on the Do not damage the socket by using unsuitable interior rearview mirror simultaneously for ap‐ connectors. 131 Online Edition for Part no. 01 40 2 960 891 - II/15

owners manual BMW i8

owners manual BMW i8 - year of production: 2014 - BMW i8 owners manual EN