owners manual Seat Toledo

all ratings: 0 average rating: 5

Advice ● Worn tyres reduce the necessary grip atFor the sake of the environment Wheels and tyres high speeds on damp surfaces. This could Under-inflated tyres increases fuel consump- lead to “aquaplaning” (uncontrolled vehicle tion. Wheels movement – “skidding” on damp surfaces). ● Damaged wheels and tyres must be re- Introduction Note placed immediately. ● We recommend having all work on tyres ● Do not use summer or winter tyres that are WARNING and wheels carried out by an authorised SEAT more than 6 or 4 years old respectively. dealer. ● During the first 500 km, new tyres do not● Wheel bolts should be clean and screw ● We recommend using wheels, tyres, hub give maximum grip, therefore you shouldeasily. However, they must never be treated drive carefully. Risk of accident! caps and snow chains from the SEAT Original with grease or oil. Accessories programme. ● Never drive with damaged tyres. Risk of ac-● If the tightening torque of the wheel bolts cident! is too low, they could loosen while the vehi- cle is moving. Risk of accident! If the tighten- ● Only use wheels and tyres that been au- ing torque of the wheel bolts is too high, the thorised by SEAT or your vehicle model. Fail- Life cycle of tyres bolts and threads could be damaged, leading ure to do so could impair road safety. Risk of to the permanent deforming of the rim sup- accident! port surfaces. ● Never exceed the maximum speed permit- ● Incorrectly handled wheel bolts could lead ted for your tyres. Risk of accident due to tyre to a wheel coming loose while the vehicle is damage and loss of vehicle control! moving. Risk of accident! ● Under-inflated tyres are submitted to great- ● Observe the national legal requirements re- er rolling resistance. This means that they garding the use of snow tyres and chains. can overheat at high speeds. This can cause tread separation and even tyre blow-out. ● For driving safety, tyres should be replacedCAUTION at least in pairs according to the axle and not ● Where a spare wheel that is not compatible individually. The tyres with the deepest tread Fig. 117 Side view of tyres with tread wear in- with the wheels fitted is used, follow the in- should always be used on the front wheels. dicators. structions ››› page 146. ● Never fit used tyres of an unknown age or ● The prescribed tightening torque for wheel prior use. Tread wear indicator bolts on steel and alloy wheels is 120 Nm. ● Tyres must be immediately changed at the The base of the side of the original tyres on ● Protect your tyres from coming into contact very latest when they have worn down to the your vehicle show 1.6 mm high tread wear in- with oil, grease and fuel. tread wear indicators. dicators ››› Fig. 117. The position of these ● Replace any lost valve caps immediately. 144

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders