owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 144 Friday, April 9, 2010 2:24 PM 144 Seat belts WARNING Fastening the seat belt Adjust the height of the belt in such a way that the shoulder part of the belt is – Pull the belt with both lock tongues out of the headliner mount. positioned approximately across the middle of your shoulder - on no account – Insert the lock tongue at the end of the belt into the seat belt buckle on the left side across your neck. until it is heard to lock in place. – Pull the second lock tongue, which is moveable on the seat belt, over the chest and Note insert it into the belt buckle on the right side until it is heard to lock in place. It is also possible to adapt the routing of the belt webbing at the front seats by adjusting – Pull on the belt to check that both lock tongues are reliably engaged in the locks. the height of the seat. – The belt tongues for the rear middle seat are shaped differently so that they only fit into the respective belt buckle. If you attempt to insert a lock tongue into the wrong Taking seat belts off belt lock it will not lock. Taking seat belt off – Take off the seat belt in the reverse order to fastening. WARNING  The three-point safety belt for the rear middle seat can only fulfil its func- tion reliably when the backrests are correctly locked into position page74. Fig. 128 Releasing lock tongue from belt  After releasing the seat belt hold it tight and let it slowly reel up until both lock lock tongues lock into the headliner mount and are secured with a magnet - risk of injury. – Press the red button in the belt lock  fig. 128. The spring force causes the tongue  Never release simultaneously both tongues of the lock. of the lock to jump out. – Guide the belt back with your hand to enable the inertia reel to wind up the belt Belt tensioners webbing more easily. A plastic knob in the belt webbing holds the belt tongue in a position which is easy to Safety for the driver and front passenger wearing their seat belts is enhanced by the get hold of. belt tensioners fitted to the inertia reels of the front three-point seat belts, in addition to the protection afforded by the airbag system. Three-point seat belt for the rear middle seat The three-point seat belts are automatically tensioned in the event of a frontal collision of a certain severity. The belt tensioners can also be deployed if the seat belts are not The three-point seat belt for the rear middle seat is anchored in the area fastened. of the luggage compartment on the left side of the headliner.The belt tensioner is deployed in the event of a frontal collision of major severity. A Your car is equipped as standard with the three-point seat beltpowder charge is ignited in the inertia reels during deployment. The belt webbing is pulled into the inertia reels by a mechanical system and the belt is tensioned.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders