owners manual Suzuki SX4 S-Cross

owners manual Suzuki SX4 S-Cross - year of production: 2013 - Suzuki SX4 S Cross owners manual EN

Document: pdf (16.28 MB) 454 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Suzuki SX4 S-Cross, year of production 2013:

OPERATING YOUR VEHICLE "Remote Controller Outside" Warn- (OFF) by preSSing the engine switch and ing then perform the engine starting opera- tion. Refer to "Starting the Engine" in this When either of the conditions described section. below is met, the system issues a "remote • Always keep the remote controller with you controller outside" warning by sounding the as the driver. interior and exterior buzzers. At the same time, the immobilizer/keyless push start Interior Workable Area for Engine system warning light comes on and the Ignition Mode Selection master warning indicator Starting, light blinks. and "Remote Controller Outside" • Any door is opened and then closed Warning while the remote controller is not inside the vehicle and the engine is running or the ignition mode has been changed to "ACC" or "ON" by pressing the engine (1) Immobilizer/keyless push start sys- switch. tem warning light (blinks) • The remote controller is not inside the (2) Master warning indicator light (blinks) vehicle when you attempt to start the engine after changing the ignition mode NOTE: to "ACC" or "ON" by preSSing the engine • If the warning is given, locate the remote switch. as soon as possible. controller • Any attempt to start the engine will fail (1 ) while the warning is active. The mes- sage appearing on the information dis- play in the instrument cluster will also indicate this condition. Refer to "Informa- 61MMOB002 tion display" in the "BEFORE DRIVING" (1) Interior workable area section for details. • Normally, the immobilizer/keyless push The "interior start system warning light should go out workable area" for these func- and the master warning indicator light tions is defined as all the interior spaces should stop blinking shortly after the except for the space above the instrument remote controller is brought back inside panel. the vehicle. If they remain lit and blink- to "LOCK" ing, change the ignition mode 3-9

Download PDF

Click here to download a pdf file with an instruction manual for Suzuki SX4 S-Cross
year of production from: 2013

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.