owners manual Skoda Citigo

all ratings: 0 average rating: 5

B - Low beam and main beam First read and observe the introductory information and safety warn- ings on page ĖęĖ. ä C - Parking and daytime running light › Push the side repeater turn signal light in the direction of the arrow Changing the bulb for the front turn signal light Ė » Fig. ĖėĘ. › 0urn the bulb holder A » Fig. Ėėėanti-clockwise up to the stop and remove. › Prise the turn signal light from the body in the direction of the arrow ė . › Push the faulty bulb into the holder, turn in anti-clockwise up to the stop and › Remove the bulb holder Ę in the direction of arrow. remove. › Remove the faulty bulb from the socket. › Insert a new bulb into the socket and turn clockwise to the stop. › Insert a new bulb into the socket. › Insert the lamp holder with the new bulb into the headlamp and turn it clock- › Replace the bulb holder. wise until it stops. › Set the side repeater turn signal light with the side facing the rear of the vehi- Replacing the bulb for low beam and main beam cle in the body and lightly press it until the spring on the other side of the side › Remove the connector on the bulb B » Fig. Ėėė. Ð repeater turn signal light latches. › Remove the rubber cover. › Press the circlip D in the direction of the headlamp and then unhook in the di- rection of the arrow. Changing light bulbs for fog lights › Remove the light bulb and insert a new light bulb in such a way that the fixing lugs of the light bulb socket fit into the recesses at the headlight. Installation is carried out in the reverse order. Replacing the bulb for the front parking light and daylight running light › 0urn the bulb holder C » Fig. Ėėėanti-clockwise up to the stop and remove. › Remove the faulty bulb from the socket. › Insert a new bulb into the socket. › Insert the lamp holder with the new bulb into the headlamp and turn it clock- Ð wise until it stops. Fig. Ėėę Front wheel houe: Changing light bulbs for fog lights Changing the light bulb for side repeater turn signal lights First read and observe the introductory information and safety warn- ings on page ĖęĖ. ä › 1nscrew the two attachment bolts on the wheel house trim with the screw- driver » page ĖėĜ, 2ehicle tool kit (arrows) » Fig. Ėėę. › 1ndo the expanding rivet A » Fig. Ėėę below on the wheel house trim with a flat, dull object, such as a coin, remove. › Fold the wheel house trim to the side, remove the connector Ė . › 0urn the lamp holder (bulb set- holder including bulb) anti-clockwise as far as the stop, remove. › Insert the lamp holder with the new bulb into the headlamp and turn it clock- wise as far as the stop; insert the connector until it latches securely. Fig. ĖėĘ Right side: Replacing the bulb for the turn signal light Fold the wheel house trim back. £ › Ėęė Do-it-yourself

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders