instrukcja obsługi Suzuki SX4 S Cross Suzuki SX4 S Cross owners manual page 143

text version of content this owner's manual page from owners manual to the vehicle Suzuki SX4 S-Cross, year of production 2013:

OPERATING YOUR VEHICLE NOTE: NOTE: CVT - If the gearshift lever is in any EXAMPLE If you still cannot select the ignition position other than "P", or if the knob but- modes, there may be some problem with ton is pushed when the gearshift lever is the keyless push start system. Contact in "P" position the ignition mode cannot an authorized SUZUKI dealer for an be returned to "LOCK" (OFF). inspection of the system. When selecting the ignition modes, the The immobi/izerlkeyless push start sys- information display in the instrument tem warning light will come on for about cluster shows certain messages. Refer 5 seconds while the master warning indi- to "Information Display" in the "BEFORE cator light is blinking. In addition, the DRIVING" section for details. information display in the instrument cluster will show If the master warning indicator light a message during this time. Refer to "Information Display" in blinks and the ignition modes cannot the "BEFORE DRIVING" section for be selected 58MST0302 details. Your keyless push start system remote con-1) Without depressing the brake pedal You may customize the system to cause troller may not be sensed as being within the and the clutch pedal, push the engine the interior buzzer to sound once for the "interior workable area" (refer to the related switch (1). "remote controller out of sensing range" explanation in this section). Try again after 2) Within about 10 seconds during which warning. To incorporate this customiza- making sure you have the remote controller the master warning indicator light in the tion, please contact an authorized with you. If the ignition modes still cannot be instrument cluster is blinking and the SUZUKI dealer. selected, the battery of the remote controller "PLACE KEY FOB ON START If the battery of the remote controller is may be discharged. To be able to select an about SWITCH" message appears on the to become completely discharged, ignition mode, you must then use the follow-information display, touch the engine the corresponding message will appear ing method: switch with the "LOCK" button end of on the information display when you the remote controller (2) for about 2 press the engine switch to change the seconds. ignition mode to "ON". Refer to "Informa- tion Display" in the "BEFORE DRIVING" section for details. For details on replac- ing the battery, refer to the "Key less Push Start System Remote Controller" in the "BEFORE DRIVING" section. 3-8