Infiniti QX56 QXII owners manual page 143

text version of content this owner's manual page from owners manual to the vehicle Infiniti QX56, year of production 2004 - 2010:

PROGRAMMINGTROUBLE- CLEARINGTHEPROGRAMMED IF YOURVEHICLEISSTOLEN DIAGNOSIS INFORMATION If your vehicle is stolen, you should change the If the HomeLinkTdoesnotquicklylearnthehand-Individual buttons cannot be cleared. However,codesofanynon-rollingcodedevicethathasbeen held transmitter information:to clear all programming, press and hold the twoprogrammedintoHomeLinkT.ConsulttheOwner’s ● replace the hand-held transmitter batteriesoutside buttons and release when the indicatorManual of each device or call the manufacturer or with new batteries. light begins to flash (approximately 20 seconds).dealer of those devices for additional information. ● position the hand-held transmitter with itsREPROGRAMMINGASINGLEWhen your vehicle is recovered, you will batteryareafacingawayfromtheHOMELINKTBUTTON need to reprogram the HomeLinkT Univer- HomeLinkT surface. sal Transceiver with your new transmitter ToreprogramaHomeLinkTUniversalTransceiverinformation. ● press and hold both the HomeLinkT andbutton, complete the following.FCCNotice: hand-held transmitter buttons without inter-1. Press and hold the desired HomeLinkT but- ruption. This device complies with FCC rules part 15 ton. Do not release the button until step 4and RSS-210 of Industry Canada. Operation ● position the hand-held transmitter1-3 has been completed. is subject to the following two conditions: inches (26 - 76 mm) away from the2. When the indicator light begins to flash HomeLinkT surface. Hold the transmitter inslowly (after 20 seconds), position the(1) This device may not cause harmful in- that position for up to 15 seconds. Ifhand-held transmitter1-3inches (26 - 76terference and (2) This device must accept HomeLinkT is not programmed within thatmm)awayfromtheHomeLinkTsurface.any interference that may be received, in- time, try holding the transmitter in another cludinginterferencethatmaycauseundes- position – keeping the indicator light in view3. Press and hold the hand-held transmitterired operation. at all times. button. This transmitter has been tested and com- If you continue to have programming difficulties,4. The HomeLinkT indicator light will flash, firstplies with FCC and DOC/MDC rules. please contact the INFINITI Consumer Affairsslowlyandthenrapidly.WhentheindicatorlightChangesormodificationsnotexpresslyap- Department. The phone numbers are located inbegins to flash rapidly, release both buttons.provedbythepartyresponsibleforcompli- the Foreword of this manual. The HomeLinkT Universal Transceiver button hasance could void the user’s authority to op- nowbeenreprogrammed. The new device can beerate the equipment. activated by pushing the HomeLinkT button thatDOC:ISTC1763K1313 was just programmed. This procedure will not af- fect any other programmed HomeLinkT buttons.FCCI.D. CV2V67690 Instruments and controls 2-61 ZREVIEWCOPY—2008Infiniti QX56 (iwz) Owners Manual—USA_English (nna) 03/02/07—debbieX

owners manual Infiniti QX56

owners manual Infiniti QX56 - year of production: 2004, 2005, 2006, 2007, 2008, 2009, 2010 - Infiniti QX56 QXII owners manual EN