BMW M5 F10 M Power owners manual page 142

text version of content this owner's manual page from owners manual to the vehicle BMW M5 F10, year of production 2011:

Seite 142 Controls Interior equipment erases all programming of the buttons onview mirror longer. If the LED on the interior the interior rearview mirror. rearview mirror starts flashing rapidly and then stays lit constantly for 2 seconds, the system 3. Hold the hand-held transmitter for the sys‐ features an alternating-code system. Flashing tem to be controlled approx. 1 to 3 in/2.5 to and continuous illumination of the LED will re‐ 8 cm away from the buttons on the interior peat for approximately 20 seconds. rearview mirror. The required distance de‐ pends on the manual transmitter. For systems with an alternating-code system, the integrated universal remote control and the 4. Simultaneously press and hold the button system also have to be synchronized. of the desired function on the hand-held transmitter and the button to be program‐Please read the operating manual of the sys‐ med on the interior rearview mirror. Thetem being set up for information on how to LED on the interior rearview mirror will be‐synchronize the system. gin flashing slowly. Synchronizing is easier with the aid of a sec‐ 5. Release both buttons as soon as the LED ond person. flashes more rapidly. When the LED is To synchronize: flashing faster, this indicates that the but‐ 1. Park the vehicle within range of the re‐ ton on the interior rearview mirror has been mote-controlled system. programmed. 2. Program the relevant button on the interior If the LED does not flash faster after at rearview mirror as described. least 60 seconds, change the distance be‐ tween the interior rearview mirror and the3.Locate and press the synchronizing button hand-held transmitter and repeat the step. on the system being programmed. You Several more attempts at different distan‐ have approx. 30 seconds for the next step. ces may be necessary. Wait at least 4. Hold down the programmed button on the 15 seconds between attempts. interior rearview mirror for approximately Canada: if programming with the hand- 3 seconds and then release it. If necessary, held transmitter was interrupted, hold repeat this work step up to three times in down the interior rearview mirror button order to finish synchronization. Once syn‐ and repeatedly press and release the chronization is complete, the programmed hand-held transmitter button for 2 sec‐ function will be carried out. onds. Reprogramming individual buttons 6. To program other functions on other but‐ tons, repeat steps 3 to 5. 1. Switch on the ignition. The systems can be controlled using the inte‐2.Press and hold the interior rearview mirror rior rearview mirror buttons. button to be programmed. 3. As soon as the interior rearview mirror LED Special feature of the alternating- starts flashing slowly, hold the hand-held code wireless system transmitter for the system to be controlled If you are unable to operate the system after approx. 1 to 3 in/2.5 to 8 cm away from the repeated programming, please check if the buttons on the interior rearview mirror. The system to be controlled features an alternat‐ required distance depends on the manual ing-code system. transmitter. Read the system's operating manual, or press the programmed button on the interior rear‐ 142 Online Edition for Part no. 01 40 2 909 953 - VI/13

owners manual BMW M5 F10

owners manual BMW M5 F10 - year of production: 2011 - BMW M5 F10 M Power owners manual EN