owners manual Skoda Rapid

all ratings: 0 average rating: 5

CA10ION 3heels ■ 0he headlights are never to be wiped dry - there is a risk of damaging the Read and observe and on page ĖĘę first. protective lacquer and the headlight glass subsequently developing cracks. ■ Do not use sharp objects to clean the glasses - there is a risk of damaging 3heel rims the protective lacquer and the headlight glasses subsequently developing Also thoroughly wash the wheel rims when washing the vehicle on a regular cracks. basis. ■ Do not use any aggressive cleaning or chemical solvent products to clean the headlights – risk of damaging the headlight lenses. Regularly remove salt and brake abrasion, otherwise the rim material will be corroded. Door closing cylinder Light alloy wheels After washing thoroughly, treat the wheel rims with a protective product for Read and observe and on page ĖĘę first. light alloy wheels. Specific products must be used for de-icing door lock cylinders. For the treatment of wheel rims do not use products which may cause damage to the paint on the rims. CA10ION Make sure that as little water as possible gets into the locking cylinder when CA10ION washing the vehicle - there is a risk of freezing the lock cylinder! ■ Damage to the paint layer on the wheel rims must be touched up immediate- ly. Cavity protection ■ Severe layers of dirt on the wheels can also result in wheel imbalance. 0his may show itself in the form of a wheel vibration which is transmitted to the Read and observe and on page ĖĘę first. steering wheel which, in certain circumstances, can cause premature wear of the steering. 0his means it is necessary to remove the dirt. All the cavities of your vehicle which are at risk from corrosion are protected for life by a layer of protective wax applied in the factory. 0owing device and mounting recess 0his wax protection does not need to be inspected or re-applied. Read and observe and on page ĖĘę first. If any small amount of wax flow out of the cavities at high temperatures, these must be removed with a plastic scraper and the stains cleaned using a petrole- Close the mounting recess with the cover to prevent any dirt from getting in. um cleaner. If dirt is present, clean the inner surfaces of the mounting recess and treat 3ARNING with a suitable preservative. Safety regulations should be observed when using petroleum cleaner to re- Always check the ball head before hitching a trailer. Apply a suitable grease, if move wax – risk of fire! necessary. 1se the protective cover when stowing away the tow bar, in order to stop the Jack boot from getting dirty. Read and observe and on page ĖĘę first. CA10ION Apply grease to the inner part of the mounting recess. Make sure you do not 0he jack is maintenance-free. remove any grease. If necessary, the moving parts of the jack should be lubricated with a suitable lubricant. Care and maintenanceĖĘĜ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders