owners manual Audi 100

owners manual Audi 100 - year of production: 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 - Audi 100 C3 owners manual EN

Document: pdf (7.81 MB) 180 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Audi 100, year of production 1982 - 1991:

DO-IT-YOURSELF SERVICE Step 7 Step 8 Then go crosswise from one bolt to Fully lower the vehicle and remove another tightening them firmly with the jack. lug wrench. Correct the air pressure of the tire Correct tightness of the wheel bolts is you have just put on. The cold tire important. inflation pressures are listed on the sidewall and on a sticker on the inside of Correctly tightened bolts should have a torque of 80 ft Ib (110 Nm). This the fuel tank flap. WARNING torque can be obtained with the lug wrench by any person of average Always store damaged wheel (or spa- strength. If in doubt about the correct tightness of the wheel bolts, have it re wheel), jack and tools securely in Insert the wheel bolts with the checked with a torque wrench by your luggage compartment. screwdriver handle. Then unscrew the Have flat lire repaired and replaced plastic pin and insert the remaining wheel dealer or a service station. promptly . bolt. If you should notice that the wheel bolts Remember that the compact spare Tighten all wheel bolts slightly with lug are corroded and difficult to turn, replace wheel is for tempor ary use only! wrench. them. Wheel bolts must be clean and easy to Drive carefully until y ou do this. turn – never lubricate or oil wheel bolts. WARNING The screwdriver handle must not be used to tighten wheel bolts. Step 6 To lower the vehicle, turn the han- dle counterclockw ise until the jack is fully released. 135

Download PDF

Click here to download a pdf file with an instruction manual for Audi 100
year of production from: 1982

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.