owners manual Mazda 2

owners manual Mazda 2 - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 - Mazda 2 III Demio owners manual EN

Document: pdf (5.1 MB) 340 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mazda 2, year of production 2007 - 2014:

Mazda2_8BL3-EA-10E_Edition3 Page133 Wednesday, September 29 2010 3:52 PM Black plate (133,1) Driving Your Mazda Starting and Driving If the warning light illuminates again even qTiresandWheels after the tire pressures are adjusted, there maybeatirepuncture. Replace the CAUTION punctured tire with the temporary spare Wheninspecting or adjusting the tire tire (page 7-6). air pressures, do not apply excessive NOTE force to the stem part of the wheel Atire pressure sensor is not installed to the unit. The stem part could be temporary spare tire. The warning light will damaged. flash continuously while the temporary spare tire is being used. Changingtires and wheels Warninglight flashes Thefollowing procedure allows the TPMStorecognizeatire pressure sensor's Whenthewarninglight flashes, there may unique ID signal code whenever tires or be a system malfunction. Consult an wheels are changed, such as changing to Authorized Mazda Dealer. and from winter tires. qSystemErrorActivation NOTE Eachtire pressure sensor has a unique ID Whenthewarninglight flashes, there may signal code. The signal code must be be a system malfunction. Consult an registered with the TPMS before it can work. Authorized Mazda Dealer. The easiest way to do it is to have an Asystemerror activation may occur in Authorized Mazda Dealerchange your tire and the following cases: complete ID signal code registration. l Whenthere is equipment or a device Whenhavingtireschangedatan near the vehicle using the same radio Authorized Mazda Dealer frequency as that of the tire pressure sensors. WhenanAuthorizedMazdaDealer l Whenusingthefollowing devices in changes your vehicle's tires, they will the vehicle that may cause radio complete the tire pressure sensor ID signal interference with the receiver unit. code registration. l Adigital device such as a personal computer. Whenchangingtiresyourself l Acurrent converter device such as a If you or someone else changes tires, you DC-ACconverter. or someone else can also undertake the l Whenexcess snow or ice adheres to steps for the TPMS to complete the ID the vehicle, especially around the signal code registration. wheels. l Whenthetire pressure sensor batteries 1. After tires have been changed, switch are exhausted. the ignition ON, then back to ACC or l Whenusingawheelwithnotire OFF. pressure sensor installed. 2. Wait for about 15 minutes. l Whenusingtires with steel wire reinforcement in the side walls. l Whenusingtire chains. 5-27 Form No.8BL3-EA-10E

Download PDF

Click here to download a pdf file with an instruction manual for Mazda 2
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.