owners manual Hyundai Sonata

owners manual Hyundai Sonata - year of production: 2009, 2010, 2011, 2012, 2013, 2014 - Hyundai Sonata VI 6 YF i45 owners manual EN

Document: pdf (7.33 MB) 411 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Hyundai Sonata, year of production 2009 - 2014:

Features of your vehicle Rolling code programming 2. Firmly press and release the "learn" or Gate operator & Canadian program- ming "smart" button (which activates the Rolling code devices which are "code- "training light"). protected" and manufactured after 1996 During programming, your handheld may be determined by the following: transmitter may automatically stop trans- • Reference the device owner's manual✽✽ NOTICE mitting. Continue to press the Integrated for verification. There are 30 seconds in which to initiate HomeLink®Wireless Control System but- • The handheld transmitter appears to ton (note steps 2 through 4 in the step3. ® Standard Programming portion of this program the HomeLink Universal document) while you press and re-press Transceiver but does not activate the device. 3. Return to the vehicle, firmly press and ("cycle") your handheld transmitter every hold for two seconds the desired • Press and hold the trained HomeLink ® two seconds until the frequency signal HomeLink button then release. button.The device has the rolling code has been learned.The indicator light will Repeat the "press/hold/release" feature if the indicator light flashes rap- flash slowly and then rapidly after sever- sequence a second time to complete idly and then turns solid after 2 sec- al seconds upon successful training. onds. the programming. (Some devices may require you to repeat this sequence a ® Operating HomeLink third time to complete the program- To train rolling code devices, follow these ming.) To operate, simply press and release the ® programmed HomeLinkbutton. instructions: 4.Press and hold the just-trained HomeLink®button and observe the red Activation will now occur for the trained 1. At the garage door opener receiver device (i.e. garage door opener, gate (motor-head unit) in the garage, locate Status Indicator LED. If the indicator the "learn" or "smart" button.This can light stays on constantly, programming operator, security system, entry door lock, home/office lighting, etc.). For con- is complete and your device should usually be found where the hanging venience, the hand-held transmitter of activate. antenna wire is attached to the motor- the device may also be used at any time. 5.To program the remaining two head unit. Exact location and color of the button may vary by garage doorHomeLink® buttons, follow either steps opener brand. 1 through 4 above for other Rolling If there is difficulty locating the training Code devices or steps 2 through 5 in button, reference the device owner'sStandard Programming for standard manual or please visit our Web site at devices. www.homelink.com. 4 46

Download PDF

Click here to download a pdf file with an instruction manual for Hyundai Sonata
year of production from: 2009

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.