owners manual Mazda 6

all ratings: 0 average rating: 5

Mazda6_8DQ8-EA-13L_Edition3 Page128 Friday, June 13 2014 6:21 PM Black plate (128,1) WhenDriving Start/Stop Engine NOTE 5. (Manual transaxle) l Thekeymustbecarried because the key Continue to press the clutch pedal carries an immobilizer chip that must firmly until the engine has completely communicate with the engine controls at started. short range. (Automatic transaxle) l Theengine can be started when the push Put the vehicle in park (P). If you must button start is pressed from off, ACC, or restart the engine while the vehicle is ON. moving, shift into neutral (N). l Thepushbuttonstart system functions NOTE (function which can start the engine by only (Manualtransaxle) carrying the key) can be deactivated to The starter will not operate if the clutch pedal prevent any possible adverse effect on a is not depressed sufficiently. user wearing a pacemaker or other medical (Automatic transaxle) device. If the system is deactivated, you will The starter will not operate if the shift lever is be unable to start the engine by carrying not in P or N and the brake pedal is not the key. Consult an Authorized Mazda depressed sufficiently. Dealer for details. If the push button start system functions have been deactivated, you 6. Verify that the KEYindicator light can start the engine by following the (green) (if equipped) in the instrument procedure indicated when the key battery cluster and the push button start goes dead. indicator light (green) illuminate. Refer Refer to Engine Start Function When Key to Warning/Indicator Lights on page Battery is Dead on page 4-6. 4-23. If the push button start indicator l After starting a cold engine, the engine light (green) flashes, make sure that the speed increases and a whining sound from key is being carried (for vehicles with a the engine compartment can be heard. type A meter (page 4-23), messages are This is for improved exhaust gas displayed in the instrument cluster). If purification and does not indicate defect of the push button start indicator light the parts. (green) flashes with the key being l Engine-starting is controlled by the spark carried, touch the key to the push ignition system. button start and start the engine (for This system meets all Canadian vehicles with a type A meter (page Interference-Causing Equipment Standard 4-23), messages are displayed in the requirements regulating the impulse instrument cluster). Refer to Engine electrical field strength of radio noise. Start Function When Key Battery is 1. Make sure you are carrying the key. Deadonpage4-6. 2. Occupants should fasten their seat belts. 3. Make sure the parking brake is on. 4. Continue to press the brake pedal firmly until the engine has completely started. 4-4 Form No.8DQ8-EA-13L

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders