owners manual Peugeot RCZ

all ratings: 0 average rating: 5

It is only possible to change from one gear to another if the vehicle If the selector is not in position P, when the driver's door is opened speed and engine speed permit; otherwise, the gearbox will operate or approximately 45 seconds after the ignition is switched off, temporarily in automatic mode. there is an audible signal accompanied by a message. F Return the selector to position P; the audible signal stops and M and the gears engaged manually appear in succession in the message disappears. the instrument panel. If the engine speed is too low or too high, the gear selected OPERATING FAULT lashes for a few seconds, then the actual gear engaged is displayed. When the ignition is on, the illumination of this warning lamp, It is possible to change from position d (automatic) to position M accompanied by an audible signal and a message in the (manual) at any time. screen, indicates a gearbox malfunction. When the vehicle is stationary or moving very slowly, the gearbox In this case, the gearbox switches to emergency mode and is locked in selects gear M1 automatically. 3rd gear. You may feel a substantial knock when changing from P to R The sport and snow programmes do not operate in manual mode.and from N to R. This will not cause any damage to the gearbox. Do not exceed a speed of 60 mph (100 km/h), local speed restrictions permitting. Have it checked by a PEUGEOT dealer or a qualiied workshop. Invalid value during manual operation This warning lamp may also come on if a door is opened. This symbol is displayed if a gear is not engaged correctly (selector between two positions). There is a risk of damage to the gearbox: - if you press the accelerator and brake pedals at the same time, - if you force the selector from position P to another position STOPPING THE VEHICLE when the battery is lat. Before switching off the engine, you can engage position P or N to place the gearbox in neutral. To reduce fuel consumption during a long period stationary with In both cases, apply the parking brake to immobilise the vehicle.the engine running (trafic jam, etc.), place the gear selector in DRIVING position N and apply the parking brake. 6/ 125

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders