Mitsubishi Lancer Sportback VIII 8 owners manual page 125

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer Sportback, year of production 2007 - 2016:

BK0151000US.book 32 ページ㧞㧜㧝㧞年㧟月㧞㧥日　木曜日　午後６時㧤分 Features and controls When the engine is hard to start 5. On vehicles equipped with manual transaxle, place the gearshift lever in the “N” (Neutral) position. After several attempts, you may experience that the engine still does not start. On vehicles equipped with continuously variable trans- mission (CVT) or Twin Clutch SST, make sure the selec-1. Make sure that all electric devices, such as lights, air con- tor lever (CVT) or the gearshift lever (Twin Clutch SST)ditioning blower and rear window defogger, are turned is in the “P” (PARK) position. off. NOTE 2. While depressing the brake pedal on vehicles equipped ●On vehicles equipped with CVT, the starter will not oper-with continuously variable transmission (CVT) or the ate unless the selector lever is in the “P” (PARK) or “N”clutch pedal on the vehicles equipped with manual tran- (NEUTRAL) position. saxle, press the accelerator pedal halfway and hold it On vehicles equipped with Twin Clutch SST, the starterthere, then crank the engine. Release the accelerator will not operate unless the gearshift lever is in the “P”pedal, immediately after the engine starts. 3. If the engine still will not start, the engine could be 3 (PARK) position or the gearshift lever is in the “N” (NEUTRAL) position with the brake pedal depressed. flooded with too much gasoline. While depressing the For safety reasons, start the engine in the “P” (PARK)brake pedal on vehicles equipped with CVT or the clutch position so that the wheels are locked. pedal on the vehicles equipped with manual transaxle, push the accelerator pedal all the way down and hold it 6. While pushing the ignition switch from “LOCK” (PUSHthere, then crank the engine for 5 to 6 seconds. Return the OFF) to “LOCK” (PUSH ON), set the ignition switch toignition switch to the “LOCK” position and release the the “ON” position and confirm that all warning lights andaccelerator pedal. Wait a few seconds, and then crank the warning displays are operating properly. engine again for 5 to 6 seconds while depressing the brake 7. Without pressing the accelerator pedal, slowly turn thepedal or the clutch pedal, but do not push the accelerator pedal. Release the ignition key if the engine starts. If the ignition switch to the “START” position to start the engine. Release the ignition switch when the engine starts.engine fails to start, repeat these procedures. If the engine still will not start, contact your local Mitsubishi Motors NOTE dealer or a repair facility of your choice for assistance. ●Minor noises may be heard on engine start-up. These will disappear as the engine warms up. 3-32

owners manual Mitsubishi Lancer Sportback

owners manual Mitsubishi Lancer Sportback - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer Sportback VIII 8 owners manual EN