owners manual Land Rover Range Rover

owners manual Land Rover Range Rover - year of production: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 - Land Rover Range Rover II 2 P38A owners manual EN

Document: pdf (1.74 MB) 201 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Land Rover Range Rover, year of production 1994 - 2002:

Emergencystarting CONNECTINGTHEBOOSTERCABLESDONOTswitchonanyelectricalcircuitson PETROLENGINES the previously disabled vehicle until AFTER the Alwaysadopt the following procedure:booster cables have been removed. Connect the RED booster cable between theDisconnectingthe booster cables must be an positive (+) terminal of the donor battery andEXACTreversalof the procedure used to the positive (+) terminal of the dischargedconnect them, ie: disconnect the BLACK cable battery. from the earth point on the disabled vehicle Connect the BLACK booster cable from theFIRST. negative (-) terminal of the donor battery to a good earth point (eg. an engine mounting or other unpainted surface) at least 0.5 m from the battery and well away from fuel and brake lines on the disabled vehicle (engine lifting ring shown in illustration). WARNING For safety reasons; • DONOTconnecttheBLACKcabletothe negative terminal of the discharged battery - if in doubt, seek qualified assistance. Checkthat the booster cables are clear of any movingpartsin either engine, then start the engine of the donor vehicle and allow it to idle for a few minutes. Nowstartthe vehicle with the discharged battery. Once both engines are running normally, allow them to idle for two minutes before switching off the engine of the donor vehicle. 123

Download PDF

Click here to download a pdf file with an instruction manual for Land Rover Range Rover
year of production from: 1994

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.