or
owners manual Nissan Qashqai
owners manual Nissan Qashqai - year of production: 2013 - Nissan Qashqai II 2 owners manual EN
Document:
pdf (5.1 MB) 338 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Nissan Qashqai, year of production 2013:
To exclude the ultrasonic sensors: 2. Turn the ignition switch to the “OFF” or LOCK
1. Press the ultrasonic sensor deactivation button position and wait approximately 5 seconds.
j1. 3. Repeat steps 1 and 2.
2. Close the door(s)/bonnet/back door and press 4. Restart the engine while holding the device
thelockbutton onthekeyfobtolockalldoors/ (which may have caused the interference) sepa-
back door. rated from the registered NATS key or NATS
The ultrasonic sensors are now excluded from the Intelligent Key (where fitted).
alarm system. All other functions of the system re- If this procedure allows the engine to start,
main activated until the alarm system is disarmed NISSAN recommends placing the registered SIC2045Z
again. NATSkeyorNATSIntelligent Key (where fitted) Meters and gauges (Type A)
NOTE onaseparatekey-ring to avoid interference from
other devices.
One or any further number of presses of the ul-
trasonic sensor deactivation button j1 excludes
theultrasonicsensorsforthenexttimethealarm
systemisarmedandonlythatinstance.Pressing
the button twice does not reactivate the system.
NISSANANTI-THEFTSYSTEM(NATS)
The NISSAN Anti-Theft System (NATS)* will not
allow the engine to start without the use of the reg- NIC1402Z
istered NATS key. Driver’s side (Type B)
* Immobilizer NATSsecurity warning/indicator light
If the engine fails to start using the registered NATS (where fitted)
key, it may be due to interference from another One of the following functions (depending on the
NATSkey,anautomatedtollroaddeviceoranauto- vehicle specifications) indicates that the vehicle is
mated payment device on the key ring. Restart the equipped with NATS:
engine using the following procedure:
1. Leave the ignition switch in the ON position for • The NATS security warning light (Type A) is lo-
approximately 5 seconds. cated in the meter panel and blinks whenever
the ignition switch is in the LOCK, “OFF” or Acc
position.
Pre-driving checks and adjustments 3-13
Download PDF
Click here to download a pdf file with an instruction manual for Nissan Qashqai
year of production from: 2013
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Nissan Qashqai II 2 owners manual
pages 120 - 126
Nissan Qashqai II 2 owners manual
page 123 / 338
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF