owners manual Seat Cordoba

all ratings: 0 average rating: 5

COR_ING_0707 Seite 121 Mittwoch, 1. August 2007 6:25 18 Heating, Ventilation and Air conditioning121 – Turn the temperature control switch until the desired interior Air recirculation  temperature is obtained. Air recirculation mode prevents fumes or unpleasant smells – Turn the blower switch to one of the settings 1-4.from entering the vehicle. – Set the air distribution control to the air flow configuration When air recirculation mode is switched on (button ⇒ page 120, fig. 91  desired:  (towards the windscreen),  (towards the chest), with warning lamp) strong odours in the outside air do not enter the vehicle  (towards the foot rest) and  (towards the windscreen and interior, for example when passing through a tunnel or in queuing traffic. foot rest areas). When the outside temperature is low, using air recirculation mode provides more effective heating by heating air from the vehicle interior instead of cold Heating air from outside. Maximum heat output, which is needed to defrost the windows quickly, is When the outside temperature is high, using air recirculation mode provides only available when the engine has reached its operating temperature.more effective cooling by cooling air from the vehicle interior instead of warm Coolant system air from outside. When the cooling system is switched on, not only the temperature, but also For reasons of safety, air recirculation is not possible when the control for air the air humidity in the vehicle interior is reduced. This improves comfort for distribution is set to the windscreen setting . the vehicle occupants and prevents misting of the windows when the outside air humidity is high. WARNING If the cooling system cannot be switched on this may be due to the following reasons: In air recirculation mode, no ambient air enters the vehicle interior. If the • the engine is not running. air conditioning system is switched off, the windows can quickly mist over. • The blower is switched off. Therefore, you should never leave the air recirculation mode switched on for longer periods, as this increases the risk of an accident. • The outside temperature is lower than +5°C. • the cooling system compressor has been temporarily switched off Note because the engine coolant temperature is too high.• When reverse gear is engaged the air recirculation connects automatically • The air conditioning fuse is faulty. to prevent the entrance of exhaust fumes in the vehicle on travelling back- • Another fault in the vehicle. Have the air conditioning checked by a qual-wards. The control light on the button  does not light up. ified workshop. • If the temperature control is turned to the coldest setting (blue point) and the switch AC is activated, the “Air recirculation” function is automatically activated in order to cool the passenger compartment rapidly using a minimum of energy and the function indicator will light. Safety First Operating instructions Tips and Maintenance Technical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders