owners manual Seat Altea

all ratings: 0 average rating: 5

Lights and visibility 121 Optional heated windscreen in the wiper blade* area (page • The windscreen will be wiped again after approximately five seconds once In some countries and with some versions, there is the possibility of heating the “automatic wipe/wash system” has been operated while the vehicle is in the windscreen in the area of the windscreen wiper blades in order to aid de- transit (automatic function). If the windscreen wiper function is activated icing in the zone. within three seconds of the automatic function, a new cleaning cycle begins without performing the final wipe. To re activate the “automatic” function the This function is activated by turning the exterior heated rearview mirror* ignition must be turned off and on again. control forwards Ÿ page125. • When the “intermittent wipe function” is on, the intervals are directly proportional to the speed. This way, the higher the vehicle speed the shorter WARNING the intervals. • Worn and dirty wiper blades obstruct visibility and reduce safety levels. • The wiper will try to wipe away any obstacles that are on the windscreen. • In cold conditions, you should not use the wash / wipe system unless The wiper will stop moving if the obstacle blocks its path. Remove the obstacle and switch the wiper back on again. you have warmed the windscreen with the heating and ventilation system. • Before removing any objects that may be trapped in the side areas of the The washer fluid could otherwise freeze on the windscreen and obscure windscreen, always move the wiper arms to the service position your view of the road. (horizontal). • Always note the corresponding warnings on Ÿ page219. Caution In icy conditions, always check that the wiper blades are not frozen to the glass before using the wipers for the first time. If you switch on the wipers when the wiper blades are frozen to the windscreen, you could damage both the wiper blades and the wiper motor. Note • The windscreen wipers will only work when the ignition is switched on. • In vehicles fitted with alarms and in certain versions, the windscreen wipers only operate when the ignition is on and the bonnet closed. • When in use, the wipers do not go as far as the rest position. When the lever is moved to position 0, they are totally hidden. • The next speed down will automatically be selected if wiper speed 2 A 3 Ÿ page120, fig. 84 or A is selected when the vehicle stops. The set speed will be resumed when the vehicle starts again. Safety First Operating instructions Tips and Maintenance Technical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders