owners manual Ford Fiesta

all ratings: 0 average rating: 5

Starting and Stopping the Engine Stopping the Engine with Your STARTING A GASOLINE Vehicle Stationary ENGINE Note:The ignition, all electrical circuits Note:You can only operate the starter for warning lamps and indicators will be a limited period of time, for example 10 switched off. seconds. The number of start attempts is Manual Transmission limited to approximately six. If you exceed Briefly press the button. this limit, the system will not allow you to try again until a period of time has elapsed, Automatic Transmission for example 30 minutes. 1. Move the transmission selector lever When you start the engine, the idle speed to position P. increases, this helps to warm up the 2. Press the button. engine. If the engine idle speed does not slow down automatically, have your Stopping the Engine When Your vehicle checked by an authorized dealer. Vehicle is Moving Before starting the engine check the following: WARNING • Make sure all occupants have fastened Switching off the engine when the their safety belts. vehicle is still moving will result in a • Make sure the headlamps and loss of brake and steering assistance. electrical accessories are off. The steering will not lock, but higher effort • Make sure the parking brake is on. will be required. With the ignition switched • Move the transmission selector lever off some electrical circuits, warning lamps to position P (automatic transmission) and indicators may also be off. or neutral (manual transmission). 1. Press and hold the button for at least • Turn the ignition key to position II. If one second or press it three times your vehicle is equipped with a keyless within two seconds. ignition, see the following instructions. 2. Move the transmission selector lever Cold or Hot Engine to position N and use the brakes to Vehicles with Manual Transmission bring your vehicle to a safe stop. 3. When your vehicle has stopped, move Note:Do not touch the accelerator pedal. the transmission selector lever to Note:Releasing the clutch pedal while the position P or N and switch the ignition engine is starting will stop the engine off. cranking and return to ignition on. 1. Fully depress the clutch pedal. 2. Start the engine. Vehicles with Automatic Transmission Note:Do not touch the accelerator pedal. 116 Fiesta (CCT)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders