owners manual Seat Leon

all ratings: 0 average rating: 5

leon_EN.book Seite 116 Donnerstag, 15. April 2010 9:19 09 116 Lights and visibility • Do not put stickers on the windscreen in front of the sensor. This may Automatic control of the dipped light in combination with the daytime cause disruptions or faults in the automatic lighting system. lighting (bi-xenon headlamps) • To avoid damage to the tail lights, the lights mounted on the tailgate go If the dipped light control and the daytime lighting are activated at the same off when the tailgate is opened (depending on the country). time, the dipped lights and the instrument panel lighting will automatically come on as required (e.g. on entering a tunnel) and the daytime lights will go off. When the automatic dipped light control switches off the dipped lights (e.g. on coming out of the tunnel), the daytime lights come back on. Daytime lights* Activating the daytime lights The daytime light reduces the risk of accidents by increasing With the ignition switched off, move the turn signal and main beam lever the visibility of the vehicle. The daytime running lights are upwards and back (right turn signal and headlamp flash). enabled automatically when the ignition is switched on. It is Switch on the ignition for 3 seconds while holding this position. The daytime automatically switched off when the side lights are turned on. lights are activated and can be switched on. Daytime lights (halogen lamps)20) Deactivating the daytime lights The daytime lights increase road safety in vehicles fitted with halogen lamps. With the ignition switched off, move the turn signal and main beam lever These include the dipped, side and number plate lights. upwards and back (left turn signal and headlamp flash) and hold in this posi- tion. The daytime lights are switched on each time the ignition is turned on if the light setting is in position 0 or !54/. Depending upon the model, a control Switch on the ignition for 3 seconds while holding this position. The daytime lamp  on the light control switch or the lighting up of the instrument panel lights are deactivated and can not be switched on. will indicate that the daytime lighting is on. Deactivating daytime lights (bi-xenon lamps) It is not possible for the driver to switch the daytime lights on or off. Please With the ignition switched off, move the turn signal and main beam lever contact a qualified workshop if you wish to deactivate the lights. upwards and back (left turn signal and headlamp flash). Daytime lights (bi-xenon lamps) Switch on the ignition for 3 seconds. The daytime lights are deactivated and The daytime lights increase road safety in vehicles fitted with bi-xenon lamps. can not be switched on. The lights are built-in separately to the headlights and are switched on each Activating daytime lights (bi-xenon lamps) time the ignition is turned on if the light setting is in position 0 or !54/. With the ignition switched off, move the turn signal and main beam lever upwards and back (left turn signal and headlamp flash). Switch on the ignition for 3 seconds. The daytime lights are activated and can be switched on. 20) It is only available in some countries or as an optional extra

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders