Hyundai Grandeur Azera TG IV 4 owners manual page 118

text version of content this owner's manual page from owners manual to the vehicle Hyundai Grandeur, year of production 2005 - 2011:

FEATURES OF YOUR HYUNDAI 1 105 Standard Programming 5. Press and hold the just-trainedTo train rolling code devices, follow these To train most devices, follow these instruc- HomeLink® button and observe the red instructions: tions: Status Indicator LED. If the indicator1. At the garage door opener receiver light stays on constantly, programming (motor-head unit) in the garage, locate 1. For first-time programming, press and hold the two outside buttons, HomeLink® is complete and your device shouldthe "learn" or "smart" button. This can Channel 1 and Channel 3 Buttons, until activate when the HomeLink ® button is usually be found where the hanging the indicator light begins to flash (after pressed and released. antenna wire is attached to the motor- 6. To program the remaining two 20 seconds). Release both buttons. Do head unit. Exact location and color of ® not hold the buttons for longer than 30 HomeLink buttons, follow steps 2the button may vary by garage door seconds. through 5. opener brand. If there is difficulty locat- 2. Position the end of your hand-held trans- ing the training button, reference the Rolling Code Programming device owner's manual or please visit mitter 1-3 inches (5-14 cm) away from our Web site at www.homelink.com. ® the HomeLink buttons while keepingRolling code devices which are "code- 2. Firmly press and release the "learn" or the indicator light in view. protected" and manufactured after 1996 "smart" button (which activates the "train- 3. Simultaneously press and hold bothmay be determined by the following: ® ing light"). the HomeLink and hand-held trans-o Reference the device owner's manual mitter button. DO NOT release the but- for verification. NOTE: tons until step 4 has been completed.o The handheld transmitter appears to 4. While continuing to hold the buttons the program the HomeLink Universal Trans- There are 30 seconds in which to initiate red Indicator Status LED will flash slowly ceiver but does not activate the device. step3. ® and then rapidly after HomeLink suc- o Press and hold the trained HomeLink cessfully trains to the frequency signal button. The device has the rolling code 3. Return to the vehicle and firmly press, from the hand-held transmitter. Release feature if the indicator light flashes rap- hold for two seconds and then release both buttons. idly and then turns solid after 2 seconds. the desired HomeLink ® button. Repeat the "press/hold/release" sequence a second time to complete the program- ming. (Some devices may require you to repeat this sequence a third time to complete the programming.)

owners manual Hyundai Grandeur

owners manual Hyundai Grandeur - year of production: 2005, 2006, 2007, 2008, 2009, 2010, 2011 - Hyundai Grandeur Azera TG IV 4 owners manual EN