owners manual Skoda Octavia

all ratings: 0 average rating: 5

s43s.1.book Page 117 Thursday, May 13, 2010 1:21 PM Automatic gearbox117 Starting-off and Driving WARNING – Depress the brake pedal fully and keep it depressed. Do not depress the accelerator when changing the position of the selector – Press the Shiftlock button (button in handle of the selector lever), move the lever if the car is stationary and the engine is running - risk of accident! selector lever into the desired position, e.g. in D, and then release the Shiftlock  Never move the selector lever into position R or P when driving - risk of an button. accident! – Release the brake pedal and depress the accelerator . If you are stopping at a hill (downhill section), never try to hold the car Stop stationary with the gear engaged by means of the “accelerator”, this means by letting the clutch slip. This can lead to ov erheating of the clutch. If there is a risk – The selector lever position N does not have to be selected when stopping just for of overheating of the clutch due to overload, the clutch is opened automatically a short time, such as at a cross roads. It is absolutely sufficient to hold the stopped and the vehicle rolls backward - risk of accident! vehicle stationary by depressing the foot brake. The engine can, however, be  If you must stop at a slope, depress and hold the brake pedal, so that you can allowed just to idle. prevent the vehicle from rolling back. Parking Caution – Depress the brake pedal and hold it depressed. The double clutch on the automatic gearbox DSG is equipped with an overload – Apply the handbrake firmly. protection. If you make use of the uphill function on a vehicle which is stationary or – Press and Shiftlock button in the selector lever, move the selector lever to P and driving slowly uphill, it will result in an increase of thermal stress of the clutches. then release the Shiftlock button.  An overheating of the clutches can be detected by the flashing of the selector level indicator and the “jerk” of the clutches, finally the clutches are opened. The power The engine can only be started when the selector lever is in position P or N transmission from the engine to the front wheels is interrupted and as a result of this page108. At temperatures below -10 °C the engine can only be started in the the vehicle can no longer be driven. If the clutch opens automatically, depress the selector lever position P. brake pedal, wait a few seconds and only then continue driving. It is sufficient to engage selector lever position P when parking on a flat surface. When parking on a slope you should first apply the handbrake firmly and then move the selector lever into position P. This is to ensure that there is no excessive pressure acting on the lock mechanism and that it is easier to subsequently move the selector lever out of position P. If the selector lever position N is selected by accident while driving it is first necessary to release pressure on the accelerator pedal and wait for idling speed of the engine to be reached before engaging a drive position in the selector lever. Using the systemSafety Driving Tips General MaintenanceBreakdown assistanceTechnical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders