BMW 7 E65 owners manual page 117

text version of content this owner's manual page from owners manual to the vehicle BMW 7 E65, year of production 2001 - 2008:

The device can be operated as of ignition The corresponding memory key 1 is now on. programmed with the signal of the original If the device can not be operated after hand-held transmitter. repeated programming, check If you have any additional questions, whether the original hand-held transmitter please contact your BMW center.< At a glance uses an alternating-code system. To do so, either read the instructions of the original Clearing memory keys hand-held transmitter or press and hold Individual memory keys 1 can not be down the programmed memory key 1 of cleared. However, you clear all three the integrated universal remote control. If memory keys 1 together as follows: the indicator lamp 2 on the integrated uni-Press both outer keys 1 of the integrated Controls versal remote control flashes quickly for a universal remote control for approx. brief period and then remains lit up for 20 seconds, maintaining pressure until the approx. two seconds, this indicates that indicator lamp 2 starts to flash. the original hand-held transmitter is equipped with an alternating code. In the case of an alternating-code system, pro- Sun blinds* gram the memory keys 1 as described at the section on alternating-code transmit- Driving tips ters.< Rear window blind Alternating-code transmitters Consult the operating instructions of the unit you wish to set when programming the integrated universal remote control. Find Navigation out about the possibility for synchroniza- tion. When programming hand-held transmitters that employ an alternating code, please observe the following supplementary instructions: Activate by briefly pressing the button in Programming will be easier with the the driver's door with the ignition lock in the Entertainment aid of a second person.< radio mode. 1. Park your vehicle within the range of the Window blind for rear side windows remote-controlled device 2. Program the integrated universal remote control as described at the sec- tion on fixed code hand-held transmit- ters. Communications 3. Localize the key on the receiver of the device you want to set up, e.g. on the upper section of the motor 4. Press the key on the receiver of the device you want to set up. After step 4, approx. 30 seconds remain for step 5 Activate by pressing the desired button Mobility 5. Press the programmed memory key 1 with the ignition lock in the radio mode. on the integrated universal remote con-1 Quarter window blind trol three times. 2 Side window blind 115 Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG Reference

owners manual BMW 7 E65

owners manual BMW 7 E65 - year of production: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 - BMW 7 E65 owners manual EN