BMW i8 owners manual page 116

text version of content this owner's manual page from owners manual to the vehicle BMW i8, year of production 2014:

Seite 100 Controls Safety 5. Reset tire inflation pressure:"Perform Status control display reset". Tire and system status are indicated by the color of the wheels and a text message on the6.Drive away. Control Display. The tires are shown in gray and the status is displayed. All wheels green After driving faster than 19 mph/30 km/h for a System is active and will issue a warning rela‐ short period, the set tire inflation pressures are tive to the tire inflation pressures stored during accepted as reference values. The reset is the last reset. completed automatically while driving. The progress of the reset is displayed. One wheel is yellow After a successfully completed Reset, the A flat tire or major drop in inflation pressure in wheels on the Control Display are shown in the indicated tire. green and "Tire Pressure Monitor (TPM) active" is displayed. All wheels are yellow You may interrupt this trip at any time. When A flat tire or major drop in inflation pressure in you continue the reset resumes automatically. several tires. Low tire pressure message Wheels, gray The yellow warning lamp lights up. A The system cannot detect a flat tire. Reasons Check Control message is displayed. for this may be: ▷ There is a flat tire or a major loss in ▷ The system is being reset. tire inflation pressure. ▷ Malfunction. ▷ No reset was performed for the system. The system therefore issues a warning Status information based on the tire inflation pressures before The status control display additionally shows the last reset. the current tire inflation pressures and, de‐ pending on the model, tire temperatures. It Reduce your speed and stop cautiously. Avoid shows the actual values read; they may vary sudden braking and steering maneuvers. Do depending on driving style or weather condi‐ not continue driving, and contact the service tions. center. If a Mobility System is not available, contact Carry out reset the service center. Reset the system after each adjustment of the A low tire inflation pressure might turn on DSC tire inflation pressure and after every tire or Dynamic Stability Control. wheel change. On the Control Display and on the vehicle: Required tire inflation pressure check message 1. "Vehicle info" A Check Control message is displayed in the 2. "Vehicle status" following situations 3. "Perform reset" ▷ The system has detected a wheel change, 4. Switch on drive readiness ѭ do not drive but no reset was done. off. 100 Online Edition for Part no. 01 40 2 960 891 - II/15

owners manual BMW i8

owners manual BMW i8 - year of production: 2014 - BMW i8 owners manual EN