owners manual Subaru Forester

all ratings: 0 average rating: 5

Keys and doors/Alarm system2-21 position) “AL oF” and the horn sounds twice,stop. . Cargo area light (illuminates onlyindicating that the system is now deacti- when the cargo area light switch is invated. &Armingthe system the “ON” position) If the system was previously deacti- vated: NOTE The notifications regarding the mapThe odometer/trip meter screen displays. Thesystemcanbearmedevenifthe lights, dome light and cargo area light“AL on” and the horn sounds once,engine hood, the windows and/or aredeactivatedasthefactorysetting.Aindicating that the system is now acti-moonroof are open. Always make sure SUBARU dealer can activate the sys-vated. that they are fully closed before arming tem. Contact your SUBARU dealer for the system. details. NOTE . The 30-second standby time can be eliminated if you prefer. Have it per- You may have the above setting &Activating and deactivating change done by your SUBARU dealer.formed by your SUBARU dealer. the alarm system . The system is in the standby mode To change the setting of your vehicle’s&If you have accidentally trig-for a 30-second period before arming alarm system for activation or deactiva-gered the alarm systemthe system. The security indicator light tion, do the following. will flash at short intervals during this ! Tostop the alarm period. 1. Disarm the alarm system. Refer toPerform any of the following operations If any of the following actions is “Disarming the system” F2-24. . Press any button on the access key/done during the standby period, the 2. Sit in the driver’s seat and shut allremote transmitter. system will not switch to the surveil- doors and the rear gate. . Turn the ignition switch to the “ON”lance state. 3. Turn the ignition switch to the “ON”position (models without “keyless access– Doors (including the rear gate) position. with push-button start system”). are unlocked using the access key/ 4. Hold down the REAR (UNLOCK) side. Turn the push-button ignition to theremote transmitter. of the driver’s power door locking switch,“ACC” position (models with “keyless– Doors (including the rear gate) open the driver’s door within the followingaccess with push-button start system”).are unlocked using the keyless 1 second, and wait 10 seconds without access function (models with “key- releasing the switch. The setting will thenNOTE less access with push-button start be changed as follows. Only registered keys will stop thesystem”). If the system was previously activated:alarm. If the immobilizer transponder– Any door (including the rear The odometer/trip meter screen displaysis not registered, the alarm will notgate) is opened. – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders