owners manual Suzuki Swift

all ratings: 0 average rating: 5

OPERATING YOUR VEHICLE engine switch with the lock switch end "Remote Controller Outside" Warn- NOTE: of the remote controller (2) for about 2 ing • If the warning is given, locate the remote seconds. controller When the conditions described below are as soon as possible. NOTE: met, the system gives a "remote controller • Any attempt to start the engine will fail outside" warning by sounding the interior and while the warning is active. Blinking of • If you still cannot select the ignition exterior buzzers and blinking the immobilizer/ the immobilizerlkeyless push start sys- modes, there may be some problem with keyless push start system warning light. tem warning light in the instrument clus- the keyless push start system. Contact • The remote controller is not inside the ter will indicate this condition. Refer to an authorized SUZUKI dealer for an vehicle when any of the doors is opened "Warning and Indicator Lights" in the inspection of the system. when the engine is running or when the "BEFORE DRIVING" section for details. • The immobilizerlkeyless push start sys- engine switch is pressed to change the • Blinking of the immobilizerlkeyless push tem warning light come on for about 5 ignition mode to "ACC" or "ON" and then start system warning light should stop seconds while the "PUSH" indicator light all doors are closed. shortly after the remote controller is is blinking. Refer to "Warning and Indica-• The remote controller is not inside the brought back inside the vehicle. If they tor Lights" in the "BEFORE DRIVING" vehicle when you attempt to start the do not stop blinking, change the ignition section for details. engine after changing the ignition mode mode to "LOCK" (OFF) by pressing the • You may customize the system to cause to "ACC" or "ON" by pressing the engine engine switch and then perform the the interior buzzer to sound once for the switch. engine starting operation. "remote controller out of sensing range" • Always keep the remote controller with warning. To incorporate this customiza- you as the driver. tion, please contact an authorized SUZUKI dealer. • If the battery of the remote controller is about to become completely discharged, the keyless push start system remote controller battery consumption warning in the instrument cluster will come light on for a few seconds when you press the engine switch to change the ignition mode to "ON". Refer to 'Warning and Indicator Lights" in the "BEFORE DRIV- ING" section for details. For details on replacing the battery, refer to the "Key- less Push Start System Remote Control- 68LM308 ler" in the "BEFORE DRIVING" section. (1) Immobilizer/keyless push start sys- tem warning light (blinking) 3-8

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders