or
owners manual Skoda Superb
owners manual Skoda Superb - year of production: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 - Skoda Superb II 2 owners manual EN
Document:
pdf (17.92 MB) 267 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Skoda Superb, year of production 2008 - 2015:
All communication between a telephone and the hands-free system of your vehi- ›Select the Phone - New user menu in the information display and wait until the
®
cle can only be established with the help of the following profiles of Bluetooth hands-free system has completed the search.
technology. ›Select the phone you wish to connect from the list of units found.
Ė)
›Confirm the PIN .
rSAP - Remote SIM access profile
›If your SIM card is blocked by a PIN code, enter the PIN code for the SIM card in
After connecting the telephone with the hands-free system via the rSAP profile,
your phone. 0he telephone connects to the hands-free system (during the first
the telephone deregisters from the GSM network, and communication with the
connection you can only enter the PIN code in the information display when the
network is only enabled by the hands-free system via the vehicle's external aerial.
vehicle is stationary, as this is the only situation when you can choose whether
®
In the telephone only the interface for Bluetooth remains active. In this case,
the PIN code should be stored).
you can only use the mobile phone to disconnect from the hands-free system, de-
›Follow the instructions in the information display, the first time a new user is
®
activate the Bluetooth connection or dial the emergency number ĖĖė (only valid
stored.
in some countries).
›Reconfirm the rSAP command on your mobile phone to download the tele-
phone book and the identification data from the SIM card into the hands-free
HFP - Hands Free Profile
system.
After connecting the telephone with the hands-free system via the HFP profile,
the telephone continues to use its GMS module and the internal antenna to com-
Connecting the telephone with the hands-free system via the HPP profile
municate with the GSM network.
®
›Activate Bluetooth and the visibility of your mobile phone on your telephone.
›Switch on the ignition.
Note
›Select the Phone - New user menu in the information display and wait until the
hands-free system has completed the search.
0he following guidelines must be observed » page Ėĕě, Mobile phones and two-
›Select the phone you wish to connect from the list of units found.
way radio systems.
Ė)
›Confirm the PIN .
›Follow the instructions on the information display and the mobile phone to
store a new user or to download the telephone book and identification data
Connecting the phone to the hands-free system
from the SIM card into the hands-free system.
First read and observe the introductory information given on page ĖĖė.
0he telephone primarily connects via the rSAP profile.
If the PIN code was stored, the telephone is automatically detected and connec-
0o connect a mobile phone with the hands-free system, it is necessary to inter- ted with the hands-free system the next time the ignition is switched on. Check
connect the telephone and hands-free system. Detailed information on this is your mobile phone to see whether this automatic connection has been establish-
provided in the operating instructions for your mobile phone. 0he following steps ed.
must be carried out for the connection.
Connecting the telephone with the hands-free system via the rSAP profile
®
›Activate Bluetooth and the visibility of your mobile phone on your telephone.
For certain mobile phones it is necessary to switch on first the rSAP function.
›Switch on the ignition.
Ė) ®
Depending on the Bluetooth version on the mobile phone, an automatically generated ě-digit PIN
(SSP) will either be displayed, or a Ėě-digit code displayed in the information display will need to be
entered into your mobile phone and confirmed within Ęĕ seconds by following the instructions on
your mobile phone display.
Communication and multimedia ĖĖĘ
Download PDF
Click here to download a pdf file with an instruction manual for Skoda Superb
year of production from: 2008
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Skoda Superb II 2 owners manual
pages 112 - 118
Skoda Superb II 2 owners manual
page 115 / 267
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Other available language versions of this manual:
Skoda Superb II 2 instrukcja PL
show the owner's manual
pdf - 43.38 MB