text version of content this owner's manual page
from owners manual to the vehicle Peugeot 4008, year of production 2012:
Driving
Stop & Start (Auto Stop & go) function
the Stop & Start (Auto Stop & go) function puts the engine temporarily into standby during stops in the traffic (red lights, traffic jams, or other.).
the engine restarts automatically as soon as you want to move off. the restart takes place instantly, quickly and silently.
Perfect for urban use, the Stop & Start (Auto Stop & go) function reduces fuel consumption and exhaust emissions as well as the noise level when
stationary.
Operation Special cases: STOP mode not
Going into engine STOP mode available
StOP mode is not invoked when:
the "AS&G" warning lamp comes on in - the driver's seat belt is not fastened,4
the instrument panel or the instrument When the engine is stopped - the driver's door is open,
panel screen and the engine goes into automatically, the operation of certain - the bonnet is open,
standby after a few seconds:vehicle systems, such as for example, - the minimum time period of 30 seconds
braking, power steering. are modified. since starting the engine has not elapsed,
- with a manual gearbox, with the vehicle Take care. - the vehicle has not exceeded 3 mph
stationary and your foot on the brake, when (5 km/h) since the last engine start,
you put the gear lever into neutral and - the vehicle has restarted less than
release the clutch pedal. 10 seconds ago,
- the engine is needed to maintain a
Never refuel with the engine in comfortable temperature in the passenger
If you move the gear lever, the "AS&G" StOP mode; you must switch off the compartment,
warning lamp flashes, accompanied by ignition with the key or the StARt/- demisting is active,
an audible signal. StOP button. - some special conditions (battery charge,
the alert stops as soon as the gear engine temperature, braking assistance,
lever is returned to the neutral position. ambient temperature.) where the engine is
needed to assure control of a system,
- the "AS&G" warning lamp is
flashing in the instrument panel.
This operation is perfectly normal.
111
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser