BMW i3 owners manual page 113

text version of content this owner's manual page from owners manual to the vehicle BMW i3, year of production 2013:

Seite 97 Safety Controls 5. Reset tire inflation pressure:"Perform Status control display reset". Tire and system status are indicated by the color of the wheels and a text message on the6.Drive away. Control Display. The tires are shown in gray and the status is displayed. All wheels green After driving faster than 19 mph/30 km/h for a System is active and will issue a warning rela‐ short period, the set tire inflation pressures are tive to the tire inflation pressures stored during accepted as reference values. The reset is the last reset. completed automatically while driving. The progress of the reset is displayed. One wheel is yellow After a successfully completed Reset, the A flat tire or major drop in inflation pressure in wheels on the Control Display are shown in the indicated tire. green and "Tire Pressure Monitor (TPM) active" is displayed. All wheels are yellow You may interrupt this trip at any time. When A flat tire or major drop in inflation pressure in you continue the reset resumes automatically. several tires. Low tire pressure message Wheels, gray The yellow warning lamp lights up. A The system cannot detect a flat tire. Reasons Check Control message is displayed. for this may be: ▷ There is a flat tire or a major loss in ▷ The system is being reset. tire inflation pressure. ▷ Malfunction. ▷ No reset was performed for the system. The system therefore issues a warning Status information based on the tire inflation pressures before The status control display additionally shows the last reset. the current tire inflation pressures and, de‐ pending on the model, tire temperatures. It 1. Reduce your speed and stop cautiously. shows the actual values read; they may vary Avoid sudden braking and steering maneu‐ depending on driving style or weather condi‐ vers. tions. 2. Identify the damaged wheel. Do so by checking the tire inflation pressure using Carry out reset the Mobility System. To correct the tire in‐ Reset the system after each adjustment of the flation pressure, refer to page 180. tire inflation pressure and after every tire or 3. Repair flat tire with the Mobility System, re‐ wheel change. fer to page 178, or replace the damaged On the Control Display and on the vehicle: wheel. 1. "Vehicle info" If a Mobility System is not available, contact the service center. 2. "Vehicle status" A low tire inflation pressure might turn on DSC 3. "Perform reset" Dynamic Stability Control. 4. Switch on drive readiness ѭ do not drive off. 97 Online Edition for Part no. 01 40 2 960 865 - II/15

owners manual BMW i3

owners manual BMW i3 - year of production: 2013 - BMW i3 owners manual EN