BMW X1 E84 owners manual page 111

text version of content this owner's manual page from owners manual to the vehicle BMW X1 E84, year of production 2009 - 2016:

Seite 111 Interior equipment Controls distance depends on the particular hand-Synchronization: held transmitter. 1. Park the vehicle within range of the remote- 4. Press the button of the desired function on controlled system. the hand-held transmitter and the button 2. Program the corresponding button on the being programmed on the interior rearview interior rearview mirror as described. mirror simultaneously and hold. The LED on 3. Identify and press the synchronization butѪ the interior rearview mirror flashes slowly at ton on the system being set up. You have first. approx. 30 seconds for the next step. 5. When the LED flashes more rapidly, release 4. Press and hold the button on the interior both buttons. Rapid flashing indicates that rearview mirror for approx. 3 seconds and the button on the interior rearview mirror has then release it. Repeat this step up to three been programmed. times if necessary to complete the synchroѪ If the LED does not flash faster after 60 secѪ nization procedure. When synchronization onds, change the distance between the inѪ is completed, the programmed function is terior rearview mirror and the hand-held executed. transmitter and repeat the step. Multiple triѪ als at different distances may be necessary. Reprogramming individual buttons Wait at least 15 seconds between trials. 1. Switch on the ignition. 6. To program additional functions on other 2. Hold the hand-held transmitter at a distance buttons, repeat steps 3 to 5. of approx. 1 to 3 in/2.5 to 8 cm from the The systems can be operated with the buttons memory buttons. on the interior rearview mirror. The required distance depends on the parѪ ticular hand-held transmitter. Special characteristics of alternating- code radio systems 3. Press the memory button of the Universal Garage Door Opener. If the system cannot be operated after repeated programming, check whether the system to be4. If the LED flashes slowly after approx. operated uses an alternating-code system. 20 seconds, press the transmit button on the hand-held transmitter. Read the operating instructions of the system or press and hold the programmed button on the5. Release both buttons when the LED flashes interior rearview mirror. If the LED on the interiorrapidly. rearview mirror flashes rapidly at first and then If the LED does not flash rapidly after approx. lights up continuously for 2 seconds, the system 60 seconds, change the distance and repeat is equipped with an alternating-code system. the step. This flashing LED pattern repeats itself for apѪ Canada: if the LED does not flash rapidly afѪ prox. 20 seconds. ter approx. 60 seconds, change the distance In systems with an alternating-code system, the and repeat the step. If programming was Universal Garage Door Opener and the system aborted by the hand-held transmitter, hold must be additionally synchronized. down the memory button and press and reѪ Please obtain additional information on synѪ lease the button on the hand-held transmitѪ chronization in the operating instructions of theter several times for 2 seconds. system being set up. The systems will be easier to synchronize with the aid of a second person. 111 Online Edition for Part no. 01 40 2 914 595 - VI/12

owners manual BMW X1 E84

owners manual BMW X1 E84 - year of production: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - BMW X1 E84 owners manual EN