owners manual Land Rover Range Rover

owners manual Land Rover Range Rover - year of production: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 - Land Rover Range Rover II 2 P38A owners manual EN

Document: pdf (1.74 MB) 201 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Land Rover Range Rover, year of production 1994 - 2002:

Air suspension CONTROLS Ride height selector (1) Press and release the upper or lower arrow on the rocker switch to raise or lower the vehicle to the next ride height setting (the relevant indicator light will illuminate). ’Inhibit’ switch (2) Your vehicle is fitted with an electronicallyThe indicator light in the switch illuminates as controlled air suspension system (EAS) whicha bulb check when the starter is initially turned provides five different ride height settingsto position ’II’. including an ’Access’ mode. These settings•Press the switch to select ’Inhibit’ mode increase or decrease the height and ground(indicator light illuminates). This will clearance of your vehicle to cope withprevent automatic changes between different driving conditions.Standard and Low ride height. In addition, the EAS also provides automatic•Press again to switch off. suspensionlevelling. NOTE:Evenin’Inhibit’ mode, the ride height Before operating EAScan automatically change from Remember,evenifachangeofrideheightis’Access’/’Crawl’to the ’Low’ ride height and selected, it will NOT take place:from Extended or High profile to High or • If the tailgate or any door is open.Standard. • Whilst the footbrake is continously appliedRide height indicator panel (3) for less than 3 minutes.All indicator lights illuminate as a bulb check • If the engine is not running (except forwhenthestarterswitch is initially turned to position ’II’ and remain illuminated until the selection of ’Access’ within 40 seconds ofengine is started. switching off). Each specific indicator light illuminates when If the ’Access’ mode is required, ensure thea height setting is in operation. When a handbrakeis applied (select ’P’ for automaticchangein height is activated, the indicator transmission). lights illuminate in the following sequence: NOTE:Frequentchangesbetweenride•The new height indicator light flashes. heights could cause the compressor to•Whenthenewheightisreached,its overheat. If this occurs, EAS will be fullyindicator light stops flashing and operational again after a few minutes whenilluminates continuously (the previous the compressorhas cooled.indicator light extinguishes). 109

Download PDF

Click here to download a pdf file with an instruction manual for Land Rover Range Rover
year of production from: 1994

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.