owners manual Hyundai Atos

owners manual Hyundai Atos - year of production: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 - Hyundai Atos owners manual EN

Document: pdf (1.62 MB) 127 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Hyundai Atos, year of production 1997 - 2008:

DO-IT-YOURSELF MAINTENANCE G180A01A-GAT G190A01A-GAT G200A01A-AAT CHECKING BRAKE PEDAL CHECKING DRIVE BELTS CHECKING AND REPLACING CLEARANCE Water pump pulley FUSES Replacing a Fusible Link Generator Bad Good 36 mm (1.42 in.) 9.5~11.0 mm (0.37 ~ 0.43 in.) Crankshaft pulley G190A01A SSA6180A Drive belts should be checked periodically for proper tension and adjusted if necessary. At the G200A01A You need a helper to check the brake pedal clearance. With the engine running, have your same time, belts should be examined for cracks, helper press down on the brake pedal several wear, fraying or other evidence of deterioration A fusible link will melt if the electrical circuits times and then hold it down with a force of aboutand replaced if necessary. from the battery are ever overloaded, thus pre- Belt routing should also be checked to be sure venting damage to the entire wiring harness. 490N (50kg, 110lbs). The brake pedal clear- ance is the distance from the top surface of the there is no interference between the belts and (This could be caused by a short in the system drawing too much current.) If this ever happens, other parts of the engine. After a belt is re- brake pedal to the asphalt sheeting under the floor mat. placed, the new belt should be adjusted again have a Hyundai dealer determine the cause, repair the system and replace the fusible link. after two or three weeks to eliminate slack If the brake pedal clearance is not within the resulting from initial stretching after use. The fusible links are located in a relay box for limits specified in the illustration, have it in- spected by your Hyundai dealer and adjusted easy inspection. or repaired if necessary. CAUTION: When replacing a fusible link, never use anything but a new fusible link with the same or lower amperage rating. Never use a piece of wire or a higher-rated fusible link. This could result in serious damage and create a fire hazard. 6-14

Download PDF

Click here to download a pdf file with an instruction manual for Hyundai Atos
year of production from: 1997

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.