owners manual Land Rover Range Rover

owners manual Land Rover Range Rover - year of production: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 - Land Rover Range Rover II 2 P38A owners manual EN

Document: pdf (1.74 MB) 201 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Land Rover Range Rover, year of production 1994 - 2002:

Braking systems WhenABSstopsoperating,extrainitialpedal•Onsoft surfaces such as powdery snow, travel will be experienced and the ’feel’ of thesand or gravel, and also on very rough brake pedal will revert to its non-ABSsurfaces, braking distances with ABS may condition. be greater than those achievable with a non-ABSsystem.Thisisbecausethe WARNING natural action of locked wheels on soft Donotpumpthebrakepedalatanytimeassurfaces is to build up a wedge of material this will interrupt ABS operation and mayin front of the wheels which assists in increase braking distance.stopping (however, ABS will continue to provide better stability and steering Ensure that there are no obstructionscontrol). beneath the brake pedal which may prevent•If the vehicle is brought to rest on a steep full travel, i.e. additional floor mats.slope which has a very low-friction Brake pedal reactions will be different fromsurface, the vehicle may slide with the those experienced on a non-ABS vehicle.wheels locked because there is no wheel rotation to signal movement to the ABS. If this occurs, momentarily release the Additional operating informationbrakes (to permit some wheel rotation), •UnderABScontrol,heavybrakingon a drybefore re-applying them to allow ABS to road may produce tyre noise and slightregain control. Where a slow descent is markingof the road surface. Neither neednecessary,engage a LOW range gear with cause concern. the engine running to allow a controlled descent (see ’Off-road driving’ for further •Solenoid cycling may sometimes be heardinformation). whendrivingon very rough roads or while ’feathering’ (light braking) over irregular orWARNING pitted surfaces. This is part of the normalABSisdesignedtooperateonlywith ABSfunction. genuine Land Rover parts, and the tyres and •If excessive pedal travel is experienced,wheels specified in ’General data’. full braking will still be available; push theLand Rover cannot accept any responsibility pedal through the free movement untilfor inefficient operation of the system resistance is felt, then apply the necessarycausedbymodifications to the vehicle or the force to obtain braking. However, as soonfitting of non-approved components. Always as safety permits stop the vehicle and seekconsult your Land Rover dealer for advice. qualified assistance before continuing. 105

Download PDF

Click here to download a pdf file with an instruction manual for Land Rover Range Rover
year of production from: 1994

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.