BMW X5 X6 E71 E72 owners manual page 106

text version of content this owner's manual page from owners manual to the vehicle BMW X5 X6 E71 E72, year of production 2008 - 2014:

ba8_e70ag.book Seite 104 Freitag, 5. Juni 2009 11:42 11 High beams/ vene at any time and switch the high beams on mps roadsideparkinglamps and off as usual. Activating system 1. Turn the light switch to position3, refer to La page102. 2. With the low beams on, briefly press the turn signal lever toward the high-beam set- ting. 1 High beams 2 Headlamp flasher 3 Roadside parking lamps Roadside parking lamps, left or right* You also enjoy the option of lighting up just one side of your vehicle when parking. The indicator lamp in the instrument panel lights up when the high-beam Switching on assistant is activated. The system After parking the vehicle, press the lever up or automatically switches the high beams on and down beyond the resistance point for approx. off, reacting not only to oncoming traffic and 1second, arrow3. traffic ahead, but also to sufficient illumination, The roadside parking lamps drain the bat-e.g. in built-up areas. tery. Do not leave them switched on for Switching high beams on and off long periods of time, otherwise it may no longer manually be possible to start the engine.< If you wish or the situation requires it, you can Switching off intervene at any time: Briefly press the lever in the opposite direction > If the high-beam assistant has switched on up to the resistance point, arrow 3. the high beams, but you want to use low beams, simply switch them on using the turn signal lever. This deactivates the high- High-beam assistant* beam assistant. To reactivate the system, briefly press the The concept turn signal lever toward the high-beam This system automatically switches the high position. beams on and off again. The process is con-> If the high-beam assistant has switched on trolled by a sensor on the front side of the inte-the low beams, but you want to use high rior rearview mirror. The Assistant makes sure beams, simply switch them on in the usual that the high beams are switched on whenever way. This deactivates the system and you the traffic situation permit s. This relieves you of must switch to low beams manually. eyestrain and at the same time offers you the To reactivate the system, briefly press the best possible visibility. Naturally, you can inter-turn signal lever toward the high-beam position. 104 Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG

owners manual BMW X5 X6 E71 E72

owners manual BMW X5 X6 E71 E72 - year of production: 2008, 2009, 2010, 2011, 2012, 2013, 2014 - BMW X5 X6 E71 E72 owners manual EN