Mitsubishi Lancer Sportback VIII 8 owners manual page 105

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer Sportback, year of production 2007 - 2016:

BK0151000US.book 12 ページ㧞㧜㧝㧞年㧟月㧞㧥日　木曜日　午後６時㧤分 Features and controls Additional remote control transmitters Customer remote control transmitter program- N00543900036 ming To add a remote control transmitter, you must already have one N00544000047 registered remote control transmitter. You can program new remote control transmitters to the system Registering the ID code can be done by yourself or by your authorized Mitsubishi Motors dealer. For you to register the ID if you have one valid (already registered) remote control trans- code yourself, follow the “Customer remote control transmitter mitter by doing the following: programming” procedure below. 1. Have available all (current and new) remote control trans- mitters you wish to register. If you choose to have your authorized Mitsubishi Motors dealer register the ID code, take your vehicle and all remaining 2. With a valid (already registered) remote control transmit- keys to your authorized Mitsubishi Motors dealer. ter, press the UNLOCK button (2) for 4 to 10 seconds. Then press and hold the LOCK button (1). NOTE 3. Within 10 seconds of pressing the LOCK button, release 3 ●You are provided with two remote control transmitters, the LOCK and UNLOCK buttons in sequence. but you may register up to eight remote control transmit- At this time, ID codes for all remote control transmitters ters. except for the transmitter used in steps 2 and 3 are erased and the answerback function (door or rear hatch is locked and unlocked) informs you that the registration mode has been activated. 4. Within 60 seconds after step 3, complete the following ID code registration operation using the next remote control transmitter you wish to register within 4 seconds. i. Press both the LOCK and UNLOCK buttons for 2 sec- onds. ii. Release both the LOCK and UNLOCK buttons for 1 second. iii. Press the UNLOCK button. The answerback function informs you that the ID code registration of the transmitter is completed. 5. To register the ID codes of additional remote control transmitters, repeat step 4 within 60 seconds after step 4. 3-12

owners manual Mitsubishi Lancer Sportback

owners manual Mitsubishi Lancer Sportback - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer Sportback VIII 8 owners manual EN