Subaru Impreza II 2 GD owners manual page 104

text version of content this owner's manual page from owners manual to the vehicle Subaru Impreza, year of production 2001 - 2007:

A1900BE-A.book Page 17 Friday, June 17, 2005 5:40 PM Keys and doors 2-17 Tripped sensor identification the vehicle and when any of their electric wires is cut. The alarm system causes the The security indicator light flashes when the alarm system has been triggered. Al-horn to sound and the turn signal lights to so, the number of flas hes indicates the lo-flash for a short time when the sensed im- 2 cation of unauthorized intrusion or the se-pact is weak, but it warns of a strong im- verity of impact on the vehicle. pact or multiple impacts by sounding the y When the ignition switch is turned to thehorn and flashing the turn signal lights, both lasting approximately 30 seconds. “ON” position, the indicator light will light for 1 second and then flash as follows: If you desire, your SUBARU dealer can connect them and set them for activation When a door or rear gate (Wagon) or the trunk (Sedan) was opened: 5 times or deactivation. 200817 When the ignition switch was turned toNOTE the “ON” position: 3 times y The shock sensors are not always 4. Before closing the doors, lock all doorsWhen a strong impact or multiple im- with the inside door lock levers. pacts were sensed: twice (only vehiclesable to sense impacts caused by 5. Close the doors. The system will auto- with shock sensors (dealer option)) breaking in, and cannot sense an im- matically arm after one minute. pact that does not cause vibration When a light impact was sensed: once (only vehicles with shock sensors (deal-(such as breaking the glass using a In the passive mode, the system can also er option)) rescue hammer). be armed with the remote transmitter or y The shock sensors may sense vibra- with the power door locking switches. If tion like those shon in the followingw the remote transmitter or power door lock-NOTE and trigger the alarm system. Select ing switch is used to lock the vehicle, arm-Any of the above indicator light flash- the settings of the alarm system and ings will recur each time the ignition ing will take place immediately regardlessswitch is turned to the “ON” position. shock sensors appropriately depend- of whether or not the passive mode has ing on where you usually park your ve- Rearming the alarm system cancels been selected. the flashing. hicle. TDisarming the system Example: Shock sensors (dealer op- Vibration from construction site To disarm the system, briefly press the Vibration in multistory car park “ ” button on the transmitter. tion) Vibration from trains The shock sensors trigger the alarm sys-y You can have the sensitivity of the shock sensors adjusted to your prefer- tem when they sense impacts applied to ence by your SUBARU dealer.

owners manual Subaru Impreza

owners manual Subaru Impreza - year of production: 2001, 2002, 2003, 2004, 2005, 2006, 2007 - Subaru Impreza II 2 GD owners manual EN