owners manual Subaru Impreza

owners manual Subaru Impreza - year of production: 2011, 2012, 2013, 2014, 2015, 2016 - Subaru Impreza IV 4 owners manual EN

Document: pdf (40.97 MB) 446 pages

all ratings: 4 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Subaru Impreza, year of production 2011 - 2016:

Black plate (106,1) 2-16 Keysanddoors &Tripped sensor identification&Shocksensors (dealer op- Examples: The security indicator light flashes whention) – Vibrationfromaconstructionsite the alarm system has been triggered.The shock sensors trigger the alarm– Vibration in a multistory car park Also, the number of flashes indicates thesystem when they sense impacts applied– Vibration from trains location of unauthorized intrusion or theto the vehicle and when any of their. You can have the sensitivity of the severity of impact on the vehicle.electric wires are cut. The alarm systemshock sensors adjusted to your pre- When the ignition switch is turned to thecauses the horn to sound and the turnference by your SUBARU dealer. “ON” position, the indicator light will lightsignal lights to flash for a short time when for 1 second and then flash as follows.the sensed impact is weak, but it warns of . Whenadoororrear gate (5-door) wasa strong impact or multiple impacts by opened: 5 times sounding the horn and flashing the turn signal lights, both lasting approximately 30 . Whenadoor or the trunk (4-door) wasseconds. opened: 4 times If you desire, your SUBARU dealer can . Whentheignition switch was turned toconnect them and set them for activation the “ON” position: 3 times or deactivation. . When a strong impact or multiple NOTE impacts were sensed: twice (only models with shock sensors (dealer option)). The shock sensors are not always . Whenalight impact was sensed: onceabletosenseimpactscausedbybreak- (only models with shock sensors (dealering in, and cannot sense an impact that option)) does not cause vibration (such as NOTE breaking the glass using a rescue hammer). Any of the above indicator light flash-. The shock sensors may sense vi- ings will recur each time the ignitionbration as indicated in the following switch is turned to the “ON” position.examplesandtriggerthealarmsystem. RearmingthealarmsystemcancelstheSelect the settings of the alarm system flashing. and shock sensors appropriately de- pending on where you usually park your vehicle. 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28

Download PDF

Click here to download a pdf file with an instruction manual for Subaru Impreza
year of production from: 2011

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.