owners manual Peugeot iOn

owners manual Peugeot iOn - year of production: 2010 - Peugeot iOn owners manual EN

Document: pdf (5.64 MB) 176 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Peugeot iOn, year of production 2010:

Practical information Changing a wheel Parking the vehicle Tools required Wheel with wheel trim Immobilise the vehicle where it does not - A jack: for lifting the vehicle.When removing the wheel, first block traffic: the ground must be level, - A wheelbrace: for removing and refitting remove the wheel trim using the stable and not slippery.the wheel bolts. wheelbrace, by pulling at the valve hole. Apply the parking brake, switch off the - A handle: for operating the jack.When fitting the wheel, refit the wheel ignition and put the drive selector in These tools are not supplied with your vehicle.trim starting by aligning the valve hole position P to lock the wheels. with the valve, and then press on the If necessary, place a chock under the edge of the trim with the palm of your wheel diagonally opposite the wheel to hand. be changed. You must ensure that the occupants get out of the vehicle and wait where they are safe. Never go underneath a vehicle raised using a jack; use an axle stand. 8 101

Download PDF

Click here to download a pdf file with an instruction manual for Peugeot iOn
year of production from: 2010

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.