owners manual Land Rover Range Rover

all ratings: 0 average rating: 5

R Warning Indicators Hill Descent Control (HDC) information - FUEL/TEMPERATURE GAUGE GREEN DISPLAY Illuminates briefly as a bulb and Headlamp high beam - BLUE system check when the starter switch is turned to position II and Illuminates when the headlamps also illuminates when HDC is selected.are switched to high beam or If HDC is selected and all operating conditions headlamps are flashed. are met, the indicator will illuminate TPMS operation continuously. The tire pressure warning If HDC is selected and all operating conditions comprises a yellow warning are not met (vehicle in neutral gear and vehicle indicator (telltale) within the speed above HDC operating range) the instrument pack and an associated message indicator will flash. within the message center. If a fault with the HDC system occurs, HDC will Brake systems (U.S. only) fade-out and then deselect, or deselect This indicator shares its position immediately (depending on the type of fault and and symbol with four brake whether or not HDC is in operation). The green system warnings and illuminates indicator will extinguish and the message briefly as a bulb check when the starter switch SYSTEM NOT AVAILABLE will appear in the is turned to position II (the indicator will message center. illuminate red and amber during bulb check). Dynamic Stability Control (DSC) and Brake systems (Canada only) Electronic Traction Control (ETC) - AMBERThis indicator shares its position Illuminates briefly as a bulb check and symbol with four brake when the starter switch is turned system warnings and illuminates to position II. The indicator also briefly as a bulb check when the starter switch illuminates when DSC is switched off. is turned to position II (the indicator will Deactivating DSC has no effect on traction illuminate red and amber during bulb check). control. The indicator will flash while DSC and/or ETC is Emergency Brake Assist (EBA) - AMBER activated and will remain flashing until the If the indicator remains am ber after starting, or system is no longer active.illuminates whilst driving, a fault with the EBA If the indicator illuminates constantly, and does system is indicated. Drive with care and seek not extinguish when the DSC switch is pressed, qualified assistance urgently. a fault has been detected in the system and DSC Brake pad wear - AMBER and/or ETC will be inactive - drive with care and It illuminates when brak e pad wear has reached seek qualified assistance as soon as possible.a predetermined limit. Drive with care and seek qualified assistance urgently. 103

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders