owners manual Subaru Forester

all ratings: 0 average rating: 5

Keys and doors 2-17 . The 30-second standby time can beNOTE your vehicle’s alarm system for activation eliminated if you prefer. Have it per- mode. Refer to “Activating and deactivat- After disarming the alarm system, formed by your SUBARU dealer. briefly press the “” button a seconding the alarm system” F2-15. . The system is in the standby modetime within 5 seconds to unlock all for a 30-second period after locking theother doors and the rear gate.&Passive arming doors with the remote transmitter. The When passive arming mode has been security indicator light will flash at! Emergency disarmingprogrammed by the dealer, arming of the short intervals during this period.If you cannot disarm the system using thesystem is automatically accomplished . If any of the following actions aretransmitter (i.e. the transmitter is lost,without using the remote transmitter. Note done during the standby period, thebroken or the transmitter battery is toothat in this mode, DOORS MUST BE system will not switch to the surveil-weak), you can disarm the system withoutMANUALLY LOCKED. lance state. using the transmitter as follows. – Doors are unlocked using the ! Toenter the passive mode . Turn the ignition switch from the remote transmitter. “LOCK” to the “ON” position with aIf you wish to program the passive arming – Any door (including the rear registered key. mode, have it done by your SUBARU gate) is opened. dealer. – Ignition switch is turned to the&Valet mode ! Arming the system “ON” position. When you choose the valet mode, the &Disarming the system alarm system does not operate. In valet CAUTION mode, the remote transmitter is used only Briefly press the “” button (for less thanfor locking and unlocking the doors andIn passive mode, the system will 2 seconds) on the remote transmitter. Therear gate and panic activation.automatically activate the alarm but driver’s door will unlock, an electronic WILL NOT automatically lock the chirp will sound twice, the turn signalTo enter the valet mode, change thedoors. In order to lock the doors lights will flash twice. The flashing of thesetting of your vehicle’s alarm system foryou must either lock them as in- security indicator light will then changedeactivation mode. Refer to “Activatingdicated in step 4 below or with the slowly (once approximately every 3 sec-and deactivating the alarm system” F2-key once they have been closed. onds from twice approximately every 215. The security indicator light will con-Failure to lock the doors manually seconds), indicating that the alarm systemtinue to flash once every 3 secondswill result in a higher security risk. has been disarmed. indicating that the system is in the valet mode. 1. Turn the ignition switch to the “ON” To exit valet mode, change the setting ofposition. – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders