VW CC owners manual page 102

text version of content this owner's manual page from owners manual to the vehicle VW CC, year of production 2012:

Storing passenger-side outside mirror settings for backing up x Set the electronic parking brake. x Switch on the ignition. x Shift the transmission to Neutra(Nl ). x Briefly press the desired memory button 1, 2, or 3 on the outside of the driver seat. x Shift the transmission into Reverse(R ). x Adjust the passenger outside mirror to provide good visibility of the curb, for example. x The adjusted mirror position is automatically stored and assigned to the vehicle key used to unlock the vehicle. The preselected position will be recalled when the key assigned to that mirror adjustment position is used again. The passenger-side outside mirror automatically adjusts back from the position stored for backing up when the vehicle moves forward at about 10 mph (15 km/h) or more or when the rotary knob is rotated from R into a different position. Recalling stored seat memory settings x Briefly press the appropriate memory button when the vehicle is not moving, the ignition is switched off, and the vehicle door is open. x OR: If the ignition is switched on and the door is closed, press and hold the appropriate memory button until the stored position is reached. Assigning driver seat and outside mirror settings to a vehicle key The memory function of all vehicle keys is disabled when the vehicle is first delivered from the factory. To enable vehicle key memory function: x Unlock the driver door. x Press and hold a memory button until memory position is reached. x Press and hold the unlock button0 on the vehicle key and then press the desired memory button at the same time within about 3 seconds. A chime sounds to confirm activation. To disable vehicle key memory function: x Press and hold the button. SET x Press and hold the unlock button0 on the vehicle key and the desired memory button at the same time within about 10 seconds. A chime sounds to confirm deactivation. Assigning settings to an additional vehicle key x Follow the instructionsAs, signing driver seat and outside mirror settings to a vehicle key to assign the driver seat and outside mirror settings to the vehicle key. x Unlock the vehicle with the same vehicle key. x Adjust driver seat and outside mirrors. x Lock the vehicle with locking button1 in the vehicle key to store the settings. Once the settings are stored, the driver seat and the outside mirrors move to the stored positions whenever the vehicle is unlocked with the 0 button on the vehicle key (or unlocked with the door handle sensor on vehicles with Keyless Access) and the driver door is opened. If 2 people use the vehicle, each of them should always use the key in which his or her personal settings have been stored. Initializing the memory seats The memory system must be initialized by an authorized Volkswagen dealer, an authorized Volkswagen Service Facility, or another qualified workshop in certain situations, for instance, if a new driver seat is installed. Initializing clears all memories and assignments of the memory seats. After that, memory buttons can be reprogrammed and assigned to a vehicle key.

owners manual VW CC

owners manual VW CC - year of production: 2012 - VW CC owners manual EN