Mitsubishi Lancer Sportback VIII 8 owners manual page 100

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer Sportback, year of production 2007 - 2016:

BK0151000US.book 7 ページ㧞㧜㧝㧞年㧟月㧞㧥日　木曜日　午後６時㧤分 Features and controls Customer key programming (Except for vehicles NOTE sold in Canada) ●Perform the operation when the interrupt display screen is N00562200067 not showing. The interrupt display screen may prevent You can program new keys to the system if you have two valid you from seeing the immobilizer display. ●It is not possible to register a key if: (already registered) keys and blank (not registered) immobi- lizer key (specially cut for your vehicle at your Mitsubishi the immobilizer display goes off during the procedure Motors dealer) by doing the following: the immobilizer display does not come on within 30 sec- 1. Insert the first valid key into the ignition switch and turn onds after turning the ignition switch to the “ON” posi- the key to the “ON” position for 5 seconds. tion with a blank immobilizer key 2. Turn the key to the “LOCK” position and remove the first ●The procedure will be terminated automatically if: key. a period of 30 seconds or longer elapses from the 3. Within 30 seconds of turning the first key to the “LOCK” moment when the first key is turned to the “LOCK” position, insert the second valid key into the ignition and position to the moment when the second key is turned to 3 turn it to the “ON” position. About 10 seconds later, the the “ON” position immobilizer display will start to blink. a period of 30 seconds or longer elapses from the 4. When the immobilizer display starts blinking, turn the moment when the second key is turned to the “LOCK” second valid key to the “LOCK” position and remove it. position to the moment when the blank immobilizer key Within 30 seconds after doing so, insert a blank immobi- is turned to the “ON” position lizer key into the ignition switch and turn it to the “ON” ●To use the new remote control transmitters, it is necessary position. Perform this operation no more than 30 seconds to register the key with both the electronic immobilizer after the immobilizer display starts blinking. When regis- and keyless entry system. tration of the ID code is complete, the immobilizer display Also refer to “Keyless entry system: Customer remote will come on for 3 seconds then go off. If an error occurs, control transmitter programming” on page 3-12. the immobilizer display will go off during the procedure. 5. If you wish to register another key, perform the process again from step 1. 3-7

owners manual Mitsubishi Lancer Sportback

owners manual Mitsubishi Lancer Sportback - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer Sportback VIII 8 owners manual EN