owners manual Subaru Outback

owners manual Subaru Outback - year of production: 2000, 2001, 2002, 2003, 2004 - Subaru Outback Legacy owners manual EN

Document: pdf (4.48 MB) 413 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Subaru Outback, year of production 2000 - 2004:

using a phillips screwdriver. 2. Separate the case. 3. Remove the old battery from the holder. 4. Replace with a new battery (Type CR2032 or equivalent) making sure to install the new battery with the positive (+) side facing up. 5. Install the back half of the transmitter case. 6. Reinstall the two screws on the back of the transmitter case. After the battery is replaced, the transmitter must be synchro- nized with the keyless entry system’s control unit. Press either the “LOCK/ARM” or “UNLOCK/DISARM” button six times to syn- chronize the unit. Replacing lost transmitters If you lose a transmitter or want to purchase additional transmitters (up to four can be programmed), you should re-program all of your transmitters for security reasons. It is recommended that you have your dealer program all of your transmitters into your system. nProgramming the transmitters The keyless entry system is equipped with a special code learning feature that allows you to program new transmitter codes into the sys- tem or to delete old ones. The system can learn up to four unique transmitter codes. The four transmitter codes may be the same or dif- ferent. To enter the programming mode: 1 Press to dis- arm the security system (if so equipped). 2 3 HB1000CB HB1005BC 2-10

Download PDF

Click here to download a pdf file with an instruction manual for Subaru Outback
year of production from: 2000

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.